Products

EBECRYL® 221 is a hexafunctional aromatic urethane acrylate oligomer which provides very fast cure response when exposed to ultraviolet light (UV) or electron beam (EB). Cured films of EBECRYL® 221 exhibit high hardness and solvent resistance.

EBECRYL® 3700 is the diacrylate ester of a bisphenol A epoxy resin, and exhibits low odor and exceptional cure response. Films of EBECRYL® 3700 cured by ultraviolet light (UV) or electron beam (EB) demonstrate high surface hardness, high gloss, and excellent chemical resistance. EBECRYL® 3700 finds broad use in UV/EB applications, such as coatings, overprint varnishes, inks, adhesives, and electronics.

EBECRYL® LEO 10601 is a modified epoxy acrylate that provides low extractables and low odor after UV or EB curing. EBECRYL® LEO 10601 exhibits good pigment wetting properties and produces UV offset inks exhibiting enhanced ink-water balance and low misting. EBECRYL® LEO 10601 can also be used to produce UV flexo inks with good flow, high gloss and high reactivity.

SIPERNAT® 320 DS is a highly dispersible silica powder with high surface area, commonly used in coatings, adhesives, and sealants. It improves rheology, reduces viscosity, and provides enhanced flow properties. It is widely used in industrial and consumer goods applications for improving the performance and consistency of the final product.

EBECRYL® 450 is a fatty acid modified polyester hexaacrylate. Because of the special structure of the backbone and the high acrylic functionality, EBECRYL® 450 provides the proper hydrophilic-lipophilic balance necessary for lithography, combined with high reactivity when cured by ultraviolet light (UV) or an electron beam (EB). Lithographic inks based on EBECRYL® 450 display outstanding printing qualities, including excellent ink transfer, good dot definition, and proper tack and rheological properties.

EBECRYL LEO® 10103 is a multifunctional acrylate that in the presence of an amine synergist can enable the UV curing of printing inks and coatings without, or with only a minimal amount, of photoinitiator. The elimination or reduction of photoinitiator decreases the potential for migration in indirect food contact applications. EBECRYL LEO® 10103can be used for low migration over print varnishes along with flexographic and offset inks in the entire color range, including white. EBECRYL LEO® 10103 at 10-20% by weight in a coating or ink can provide a good balance of surface and through cure.

EBECRYL® 3700-20T is the bisphenol A epoxy diacrylate, EBECRYL 3700, diluted 20% by weight with the reactive diluent trimethylolpropane triacrylate (TMPTA)(1), to provide a lower viscosity, easier handling product. EBECRYL 3700- 20T exhibits very fast cure response and low odor. Films of EBECRYL® 3700-20T cured by ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, surface hardness, scratch resistance, and excellent chemical resistance.

EBECRYL® 3721 is a modified bisphenol A epoxy diacrylate resin. EBECRYL® 3721 demonstrates increased toughness in ultraviolet light (UV) or electron beam (EB) energy cured coatings compared to standard epoxy acrylates while maintaining high reactivity and superior chemical resistance.

EBECRYL® 811 is an ultraviolet light (UV) or electron beam (EB) curable polyester acrylate for either wet or dry offset printing on plastic substrates. Inks made using EBECRYL® 811 obtain excellent adhesion to calendered vinyl, polystyrene, polyolefins, polycarbonate and PVC. The water balance of this product allows inks based upon it to be run on press with low amounts of fountain solution: a key parameter for printing on non-absorbent substrates.

EBECRYL® 220 is a hexafunctional aromatic urethane acrylate that provides very fast cure response when exposed to ultraviolet light (UV) or an electron beam (EB). Cured films of EBECRYL® 220 exhibit excellent hardness and solvent resistance.