Products

RE:CHEMISTRY SOLVE100 is a pure ester-based Solvent.100% Biogenic Carbon according to ASTM D6866-20.Readily biodegradable. Non-flammable and Low volatile. Classified as Non-corrosive, Non-sensitising and Non-toxic. Miscible in conventional organic solvents and water. Ethyl Levulinate is a GRAS.

GRANOLITE® P is a pentaerythritol ester of rosin, is a light-colored and deodorized resin suitable in various adhesive and road marking Hot Melt formulations.

GRANOLITE® TEG is a triethylene glycol- esterified rosin resin with low viscosity and very low VOC content. Thanks to its low viscosity, it flows easily and is ideal for use as a tackifier and plasticizing agent in various adhesive formulations, particularly for construction.

HECTGEL RD is a synthetic layered silicate consisting of Li, Mg and Si. Its structure is constituted by two layers of Si-O tetrahedron with one layer of Mg-O octahedron. It can hydrate with water and swell to form clear and colorless colloidal dispersions. Highly thixotropic gels can be formed at concentrations of 2% or more and these gels demonstrate highly shear thinning behavior. HECTGEL RD is used where a shear sensitive waterborne gel structure is desired, having high viscosity under low shear and low viscosity when exposed to high shear. Upon removal of shear the gel viscosity is quickly recovered.

NGT 209 surfactant is borne from ecofriendly economical natural non-edible oil feed stream. It is modified with ethoxylation with different mole(s), acts as emulsifier, demulsifier, dispersing agent, wetting agent, detergency as per the end application use.

NOVEL® 1216CO-3 Ethoxylate is a biodegradable nonionic based on a linear primary alcohol formulated to simulate that derived from coconut oil. This 3-mole ethoxylate is made using Sasol Chemicals patented NOVEL technology which yields narrow range products with lower free alcohol, PEG levels and melting ranges when compared to the traditional base-catalyzed methods. It is liquid at room temperature, essentially 100% active and has the following structural formula: CH₃(CH₂)x(OCH₂CH₂)₃OH where ‘x’ varies between 11 and 15.

SAFOL 23 is a blend of C12 and C13 branched and linear alcohols. The branched isomers in SAFOL 23 are unique in that the branch is located mid-chain. This leaves the primary alcohol unobstructed for further derivatization. SAFOL 23 is a synthetic alcohol produced from olefins obtained using the novel Fischer-Tropsch process. Due to its saturation, SAFOL 23 demonstrates excellent oxidation and color stability. SAFOL 23's unique structure provides advantageous solubility and solvency.

Silcolapse® 426R is a non-ionic aqueous emulsion based on polydimethylsiloxane oil. It has 30% active matter content and is recommended for the prevention, control or elimination of foam in aqueous systems.

Silcolapse® 426R U1 is a non-ionic aqueous emulsion based on polydimethylsiloxane oil. It has 30% active matter content and is recommended for the prevention, control or elimination of foam in aqueous systems.

Silcolapse® 430 is a compound 100% active containing polydimethylsiloxane oil and silica with an excellent behaviour in a large range of pH. Silcolapse® 430 is mainly intended for treatment of anhydrous and aqueous foaming systems and has many applications in industry and food.

Silcolapse® 432 is a non-ionic, polydimethylsiloxanic oil based, aqueous emulsion. Product containing 30 % of active ingredients, recommended for the prevention, control or the elimination of foams in aqueous media.

Silcolapse® 454 is a compound containing polydimethylsiloxane oil and a mineral filler in colloidal dispersion. It is intended mainly for treating anhydrous media, but also aqueous media, in numerous industries (oil, crop protection products, detergents, chemicals, etc.). Its excellent behaviour in alkaline media and its efficiency in a wide range applications are of interest. Silcolapse® 454 is intended for industrial use only, and it should not be used in the manufacture of foodstuffs, cosmetics or pharmaceutical products.

Silcolapse® 482 is a defoamer compound containing polydimethylsiloxane oil and silica.

Silcolapse® 5020 is a non-ionic aqueous emulsion containing dimethylpolysiloxane, and is highly effective for prevention, control and elimination of foam in aqueous media. Silcolapse® 5020 contains 20% of active ingredient and is designed for industrial uses. Other specialized defoaming agents exist for use in food contact please consult us about them.

Silcolapse® 610 is a 100% active silicone antifoam and/or defoamer. It offers excellent antifoam and defoaming properties in a wide variety of aqueous and non-aqueous industrial applications. The product effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures. The product gives good results at wide-ranging pH and provides a cost effective solution where foam is a problem.