Products

EBECRYL® 244 is an aliphatic urethane diacrylate diluted 10% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA) (1). EBECRYL® 244 exhibits light color and good cure response. Films of EBECRYL® 244 cured by ultraviolet light (UV) or an electron beam (EB) demonstrate good flexibility, toughness, abrasion and water resistance, and are resistant to yellowing.

ZINCUM SW 2309 is in low bulk density, fine white powder.

H.B. Fuller® PD-0128 is a binder and resin with excellent scrub resistance, used in waterborne adhesives for adhesives, sealants, and architectural coatings.

CYMEL® U-93-210 Resin is an n-butylated urea formaldehyde resin supplied in a mixture of n-butanol and xylene. It has excellent compatibility with epoxy resins and is recommended in primer formulations which are to be topcoated and rebaked.

EBECRYL® 7110 is an acrylated amine primarily used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. benzophenone), EBECRYL® 7110provides rapid UV cure response in air by mitigating the effects of oxygen inhibition at the coating or ink surface. Unlike conventional tertiary amines such as N-methyldiethanolamine, EBECRYL® 7110 reacts to become part of the UV cured polymer, resulting in lower residual odor and improved moisture resistance. EBECRYL® 7110 also promotes adhesion to plastic substrates and lowers viscosity when used as a primary component in UV adhesives and coatings.

EBECRYL® 151 is a pigment grinding vehicle for energy curable inkjet inks. When used in conjunction with EBECRYL® 151 (a letdown vehicle), jettable, stable inks are obtained for use in drop-on-demand piezo inkjet systems.

EBECRYL® 110 is a monofunctional reactive diluent characterized by low viscosity and relatively low odor. EBECRYL® 110 is used in ultraviolet light (UV) or electron beam (EB) cured coatings to control viscosity and increase flexibility.

CRAYVALLAC® TW-1340 is a 38% active dispersion of modified polyethylene wax in isopropanol.

EBECRYL® 152 functions as a monomer in CASE ingredients and is used in radiation cure applications.

EMERAL EMR D5422 is an effect pigment and pigment used in coatings for metallic paints.

DERCOLYTE® TS 125, is produced from the polymerization of terpene and styrene. It is a light colored tackifying resin recommended to improve the viscoelastic properties of silica filled tire tread compounds. It is also showing excellent adhesive performances with block copolymers.

EBECRYL® 4683 is an unsaturated aliphatic urethane acrylate that is used in the formulation of UV-curing and electron beam-curing coatings on metal substrates.

ROPAQUE™ ULTRA Opaque Polymer is a pigment used in architectural coatings, automotive OEM coatings, and industrial coatings.

CRAYVALLAC® PA4 BA 20 is a HAPs-free rheology modifier pre-activated amide wax supplied in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form with enhanced transparency, excellent anti-sagging and anti-settling properties.CRAYVALLAC® PA4 BA 20 is supplied in the form of crystalline fibres. In a coating system, these fibres form an interacting network. This network gives rise to the shear thinning rheology of the final coating. This shear thinning characteristic provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application.