Products

CRAYVALLAC® PA3 XAF 20 is an alcohol-free pre-activated amide wax supplied in xylene. It is a rheology modifier in paste form with high efficiency (optimum sag resistance and viscosity).CRAYVALLAC® PA3 XAF 20 is supplied in the form of crystalline fibres. In a coating system, these fibres form an interacting network. This network gives rise to the shear thinning rheology of the final coating. This shear thinning characteristic provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application.

EBECRYL®1291 is a hexafunctional aliphatic urethane acrylate oligomer which provides extremely fast cure response when exposed to ultraviolet light (UV) or electron beam (EB). Cured films of EBECRYL®1291 exhibit high hardness, abrasion and solvent resistance.

RHOPLEX® I-2183N is a modified aqueous acrylic polymer offering excellent heat resistance properties as an overprint varnish and a general ink letdown vehicle. It is a hard film former that offers excellent heat resistance without the use of zinc or zirconium additives. In fact zinc compounds should not be used as they will detract from performance. On press, RHOPLEX I-2183N has excellent transfer and printability with good resolubility for ease of clean up.

ACRYSOL™ WS-68 Emulsion is a thermosetting acrylic polymer supplied as a colloidal dispersion in water. When formulated with monomeric melamine resins, it facilitates the formulation of industrial baking enamels that offer excellent spray characteristics and film properties.

RHOPLEX® I-545 is a versatile all-acrylic aqueous vehicle suitable for overprint varnishes and letdowns for flexographic and gravure ink applications. It is a hard film former that offers a distinct combination of properties - good gloss, heat resistance and water resistance with fast drying speed. On press, RHOPLEX® I-545 has excellent transfer and printability with good resolubility for ease of clean-up.

EBECRYL® 8210 is an aliphatic urethane acrylate that exhibits low viscosity and high reactivity in ultraviolet (UV) light or electron beam (EB) curable coatings. Cured films of EBECRYL® 8210 demonstrate high hardness with good scratch, abrasion and chemical resistance. EBECRYL® 8210 also contains primary hydroxyl groups that can be utilized for dual cure polymerization. Dual cure can provide instantaneous tack-free coating surfaces via UV or EB exposure while reaction of the hydroxyl groups with a suitable isocyanate enables polymerization in regions of the coating where UV or EB energy exposure is insufficient or absent.

SS-07 is energy conservation materials, environmental and safety. Non-toxic, no smell and free of heavy metals.

EBECRYL® LEO 10502 is a low viscosity polymeric tetrafunctional polyether acrylate that provides low extractables, low odor and low migration after UV or EB curing. EBECRYL® LEO 10502 is recommended for use in low odor and low migrating UV/EB curable overprint varnishes (OPV’s) and inks.

EBECRYL® 3700-20T is the bisphenol A epoxy diacrylate, EBECRYL 3700, diluted 20% by weight with the reactive diluent trimethylolpropane triacrylate (TMPTA)(1), to provide a lower viscosity, easier handling product. EBECRYL 3700- 20T exhibits very fast cure response and low odor. Films of EBECRYL® 3700-20T cured by ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, surface hardness, scratch resistance, and excellent chemical resistance.

TAMOL® 165A is a high-performance dispersant for latex gloss through flat paint. It is an ammonium salt of a hydrophobic copolymer dispersant which offers enhanced properties to latex paints resulting from improved water resistance properties, Wet Adhesion, Early Blister Resistance, Water Spot Resistance, Corrosion Resistance.

CRAYVALLAC® 60P is a solid powder wax consisting of fine particles of oxidized polyethylene recommended to prevent irreversible hard settling. The fine nature of this dispersion means that CRAYVALLAC® 60P is easily incorporated and activated in coating systems. It is mainly used in industrial and maintenance coatings where its primary function is to provide pigment suspension without any increase in the apparent viscosity. CRAYVALLAC® 60P can generally be used in most solvent-based formulations. Typical applications are epoxy primers, vinyl primers, anti-fouling paints, road marking paints and chlorinated rubber coatings.

EBECRYL® LEO 10553 is a low viscosity polymeric amine modified polyether acrylate that provides low extractables, low odor and low migration and after UV or EB curing. EBECRYL® LEO 10553 is recommended for use in low odor and low migrating UV overprint varnishes (OPV’s) and inks for indirect food packaging applications.

AP 5645 is a low viscosity, modified aliphatic amine hardener for epoxy resins based lacquers coatings.

CRAYVALLAC® ULTRA is a pure polyamide especially recommended in 2K epoxy primers for its robustness. CRAYVALLAC® ULTRA is a micronised amide wax rheology modifier offering very good recoatability for ambient curing solvent-based epoxy coatings. CRAYVALLAC® ULTRA has been designed to overcome those difficulties which exist with older type organo-wax rheology modifiers e.g. seeding, false-body and migration of readily dissolved species to the surface. Consequently, when used in strong solvent systems, coatings formulated using CRAYVALLAC® ULTRA offer an enhanced performance and very good recoatability.

PARALOID™ AU-608B are acrylic polyols specifically designed to produce hard, resistant, durable coatings when reacted with aliphatic isocyanates. The exceptional properties of these coatings have led to increased use in such heavy-duty maintenance applications as chemical plant storage tanks and offshore rigs and platforms.