Products

Licocene® PP 1502 fine grain is a low melting, metallocene-technology based propylene-ethylene copolymer, which exhibits a low degree of crystallinity.

EBECRYL® 8210 is an aliphatic urethane acrylate that exhibits low viscosity and high reactivity in ultraviolet (UV) light or electron beam (EB) curable coatings. Cured films of EBECRYL® 8210 demonstrate high hardness with good scratch, abrasion and chemical resistance. EBECRYL® 8210 also contains primary hydroxyl groups that can be utilized for dual cure polymerization. Dual cure can provide instantaneous tack-free coating surfaces via UV or EB exposure while reaction of the hydroxyl groups with a suitable isocyanate enables polymerization in regions of the coating where UV or EB energy exposure is insufficient or absent.

SharkDISPersion SX™ is a binder and resin used in plastics and elastomers for artificial grass and carpet applications. It provides good anti-static properties and UV resistance.

EBECRYL LEO® 10103 is a multifunctional acrylate that in the presence of an amine synergist can enable the UV curing of printing inks and coatings without, or with only a minimal amount, of photoinitiator. The elimination or reduction of photoinitiator decreases the potential for migration in indirect food contact applications. EBECRYL LEO® 10103can be used for low migration over print varnishes along with flexographic and offset inks in the entire color range, including white. EBECRYL LEO® 10103 at 10-20% by weight in a coating or ink can provide a good balance of surface and through cure.

ACRYLTAC® SP-400 is a carboxylated acrylic copolymer emulsion.

REAFREE® 5700 is a saturated carboxylated polyester for combination with Triglycidylisocyanurate or with ß-Hydroxyalkylamide type hardeners. Suitable for the formulation of outdoor superdurable and protective thermosetting powders. TMA free type.

RHOPLEX® VSR-5102 is a 100% Acrylic Binder designed for low-VOC interior and exterior flat to semi-gloss coatings. RHOPLEX® VSR-5102 can be formulated with little or no coalescent to pass the most stringent VOC regulations and is manufactured without the use of APEO surfactants. RHOPLEX® VSR-5102 offers a good balance of abrasive scrub resistance and stain removal along with very good exterior durability and dirt pick up resistance facilitating the formulation of high quality, low-VOC and low odor interior and exterior paints.

SS-07 is energy conservation materials, environmental and safety. Non-toxic, no smell and free of heavy metals.

Exolit® AP 428 is a fine-particle ammonium polyphosphate produced by a special method. The product is largely insoluble in water and completely insoluble in organic solvents. It is colorless, non-hygroscopic and non-flammable. Exolit® AP 428 differs from most other commercial products in the following ways, greatly reduced solubility in water lower viscosity in aqueous suspensions, lower viscosity in PU polyol suspensions.

AP 5601 is low Viscosity, reactive polyamido amine hardener for epoxy resins based coatings.

Dynasylan® F 8263 acts as a surface modifier on oxidic, carboxy- and hydroxyfunctional substrates (e.g. glass, ceramic). Dynasylan® F 8263 is a colorless liquid. It can be diluted in alcohols and various other organic solvents, e.g. n-hexane, xylol, acetone or ethyl acetate.

EBECRYL® 896 is a multifunctional monomer which polymerizes when exposed to sources of free radicals. It is composed primarily of the pentaacrylate and hexaacrylate esters of dipentaerythritol. EBECRYL® 896 is particularly useful in UV (ultraviolet) and EB (electron beam) curable inks and coatings where improved cure response, hardness and scratch/abrasion resistance are required.

Aluminium Paste FRIEND COLOR D462 GR is a high-performance metallic effect pigment designed to deliver superior visual effects in a wide range of applications. This pigment enhances the aesthetic appeal of coatings, providing a shiny, metallic finish.

KRONOS® 2160 is used for maximum durability in coatings.