Products

AP 5645 is a low viscosity, modified aliphatic amine hardener for epoxy resins based lacquers coatings.

PARALOID™ B-82 51% Resin is a softer, general purpose acrylic resin. Films based on PARALOID™ B-82 51% Resin Thermoplastic Solution Resin (51%) exhibit the water-white color, durability, flexibility and chemical resistance characteristic of acrylic polymers. PARALOID™ B-82 51% Resin Thermoplastic Solution Resin (51%) is well suited for general product finishing where a softer resin is required. It can be used over metal, plastics, wood and masonry.

AP 1032 is a low viscosity, reactive, mannish-based amine hardener for epoxy resins based lacquers and coatings.

HFGEL 120-OG is is easy to disperse and suitable for lubricating greases based on recovered oil,mineral oil with low kinematic viscosity, partial synthetic oils and other organic fluids.

BS-1C-0 is an organically modified bentonite designed for use in low to medium polarity solvent system.

EBECRYL® 1885 is an undiluted polyesteracrylate resin. Films of EBECRYL® 1885 cured by ultraviolet light (UV) or electron beam (EB) exhibits high flexibility and excellent abrasion resistance. EBECRYL® 1885 is recommended for parquet floor and furniture applications.

EBECRYL® 860 is an epoxidized soya oil acrylate especially suited to improving the flow and leveling of ultraviolet light (UV) or electron beam (EB) curable inks and coatings. Pigment wetting and adhesion are often enhanced when EBECRYL® 860 is used as a modifier in inks and clear or pigmented coatings on paper and metal.

EBECRYL® 608 is a bisphenol A epoxy diacrylate diluted approximately 27% by weight with the reactive diluent OTA- 480, propoxylated glycerol triacrylate. EBECRYL® 608 exhibits light color and very fast cure response. Films of EBECRYL® 608 cured via exposure to ultraviolet light (UV) or electron beam (EB) demonstrate high surface hardness and gloss, low residual odor and excellent chemical resistance.

EBECRYL® 885 is a trifunctional polyester acrylate oligomer. Films of EBECRYL® 885 cured by ultraviolet light (UV) or electron beam (EB) exhibits high flexibility and excellent abrasion resistance. EBECRYL® 885 is recommended for parquet floor coating, wood furniture coating applications and flexible coatings for metal.

EBECRYL® 4654 is an aliphatic urethane acrylate supplied at 60% solids in n-butyl acetate. Films of EBECRYL® 4654 are physically dry after evaporation of the solvent. EBECRYL® 4654 exhibits high reactivity in ultraviolet (UV) and electron beam (EB) energy curable coatings and yields hard polymers. Coatings based on EBECRYL® 4654 demonstrate good exterior durability, resistance to yellowing, and chemical and mechanical resistance properties.

EBECRYL® 895 is a dipentaerythritol hexaacrylate belonging to the acrylics and acrylates chemical family. It functions as a monomer and oligomer in CASE ingredients.

EBECRYL® 2221 is a hexafunctional aromatic urethane acrylate that provides very fast cure response when exposed to ultraviolet light (UV) or an electron beam (EB). Cured films of EBECRYL® 2221 exhibit good hardness and solvent resistance.

MAINCOTE™ IC-1002 is a hydrophobic acrylic-styrene copolymer with excellent flexibility and adhesion to metal substrates. This versatile binder can be combined with low thermal conductivity fillers to form waterborne thermal insulation coatings with high pigment volume concentrations (PVC), high volume solids and low VOC levels (< 25 g/L). MAINCOTE™ IC-1002 Emulsion offers uniform cure in high build insulation coatings.

CYMEL® 1125 resin is a highly methylated/ethylated, carboxyl-modified benzoguanamine crosslinker supplied in 2-butoxy ethanol. It is especially designed for electro-deposition primer formulations requiring excellent corrosion and detergent resistance. The structure of CYMEL® 1125 resin offers superior adhesion to metal substrates. CYMEL® 1125 resin can be used in a wide range of general purpose industrial finishes. However, because CYMEL® 1125 resin contains chelating groups which can form colored compounds with heavy metal ions such as iron and zinc, it is recommended for use in only dark single coat applications or primers, and not in pastel colors. Benzoguanamine resins have poor resistance to UV light, hence CYMEL® 1125 is not suitable for exterior applications

CRAYVALLAC® LA-150 is a new pourable liquid rheology modifier supplied in Dimethylsulfoxide (DMSO) for post addition to solvent based systems.CRAYVALLAC® LA-150 is a post-addition rheology modifier composed of a modified urea dissolved in DMSO. When added to the final system, the DMSO is diluted and the modified urea crystallizes out as very fine fibres which build into a three-dimensional interacting network. It is this network that gives rise to the system’s shear thinning rheology and time dependent viscosity recovery. The result is excellent control of sedimentation combined with ease of application. Immediately following application, where low shear conditions again predominate, the system’s viscosity undergoes a time dependent recovery as the network re-establishes itself. This time dependency is known as thixotropy and enables the final system to attain very good levelling.