Products

EBECRYL® 8411 is an aliphatic urethane diacrylate diluted 20% by weight with the reactive diluent isobornyl acrylate (IBOA). Films of EBECRYL® 8411 cured by ultraviolet light (UV) or electron beam (EB) exhibit exceptional extensibility and flexibility, in addition to excellent abrasion resistance, good adhesion, exterior durability and resistance to yellowing.

AP 5608 is a low viscosity modified Cyclo-aliphatic amine adducts hardener for epoxy resin based coatings. The coating made from AP 5608 has very high gloss.

Caspol™ 5003 is a 100% solids castor oil based reactive diluent with a linear chain backbone having a low viscosity, good compatibility and wetting. Caspol™ 5003, a linear chain diol, is composed of a blend of primary and secondary hydroxyls which makes this polyol more reactive yielding slightly harder and less flexible components than either Caspol™ 5001 or DBTM Oil.

CYMEL® U-80 Resin is a highly n-butylated urea resin supplied at >96% solids content. Its high extent of alkylation and hydrophobic nature make the CYMEL® U-80 Resin suitable for a wide range of coating applications, including high solids primers for automotive, general industrial, and container coatings, providing improved film flexibility and adhesion to various substrates. CYMEL® U-80 resin is insoluble in water but can be used in emulsified form as a crosslinking agent in water-dispersible alkyds, acrylic resins, and in emulsion systems.

ZHENGDA® ZD-123 is characterized by repeating oxypropylene units in the backbone. ZHENGDA® ZD-123 Amine-terminated Polyether is a difunctional, primary amine with an average molecular weight of about 230. The primary amine groups are located on secondary carbon atoms at the end of the aliphatic polyether chain.

DPGDA is a difunctional reactive diluent that polymerizes when exposed to sources of free radicals. DPGDA is particularly useful in coatings and inks where improved flexibility and adhesion are desired in combination with good moisture resistance.

AP 5635 is a low viscosity, modified Cycloaliphatic amine adduct hardener for epoxy resin based lacquers and coatings.

Caspol™ 5001 is a 100% solids castor oil based reactive diluent with a linear chain backbone having low viscosity, good compatibility and wetting. This polyol is the lowest molecular weight diol of the Caspol series. Caspol™ 5001 has a very low viscosity and produces higher strength, elongation and flexibility than DBTM Oil.

PURMOL™ 3ST is a potassium (K) type A zeolite with a pore size of approximately 3 Angstroms (0.32 nm). Purmol 3ST is recommended for use with high quality coatings. In general, we recommend the addition of 2.5% - 5% Purmol powder to the polyol component. This must be stirred thoroughly for a minimum of two hours to allow the Purmol to adsorb all the water before addition of the isocyanate.

RHOPLEX® P-308 is an excellent choice when formulating paper coatings for high quality printing and packaging that require excellent gluing properties. Paper and paperboard coatings formulated with RHOPLEX P-308 can reduce print mottle in the Lithographic printing process. It was designed to have excellent compatibility with calcium ions for today’s high calcium carbonate pigment systems and the styrene-acrylic chemistry makes this a hydrophobic binder.

Polycin® T-400 is a solventless, castor oil-based derivative designed for use as a polyol or viscosity modifier in polyurethane coating systems. Polycin® T-400 will impart higher hardness and strength, and as a reactive diluent, Polycin® T-400 provides VOC reduction along with the beneficial properties of castor oil derivatives, such as improved hydrophobicity, flow and levelling.

EBECRYL® 3708 is a modified bisphenol A epoxy diacrylate that exhibits relatively low viscosity and good cure response. Films of EBECRYL® 3708 cured by ultra- violet light (UV) or electron beam (EB) demonstrate good flexibility, high gloss, toughness, and superior impact resistance.

AP 5601 is low Viscosity, reactive polyamido amine hardener for epoxy resins based coatings.

EBECRYL® 896 is a multifunctional monomer which polymerizes when exposed to sources of free radicals. It is composed primarily of the pentaacrylate and hexaacrylate esters of dipentaerythritol. EBECRYL® 896 is particularly useful in UV (ultraviolet) and EB (electron beam) curable inks and coatings where improved cure response, hardness and scratch/abrasion resistance are required.

CYMEL® 243-3 Resin is a partially n-butylated melamine-formaldehyde crosslinking agent supplied in high flash aromatic solvent. It has excellent compatibility and is recommended for thermosetting acrylic and alkyd topcoat finishes and metal decorating systems. Its high resistivity provides wide latitude in formulating electrostatic spray finishes.