Products

EBECRYL® 4381 is a unsaturated polyester diluted with 30% dipropyleneglycol diacrylate (DPGDA)(1). Coatings based on EBECRYL® 4381 are characterized by good hardness and high gloss

TEGO® Foamex 8820 is an effective bio-based defoamer concentrate based on organic polymer technology. It has broad food contact compliances with green and renewable contents. Freeof silicone, solvent, and mineraloil.

EBECRYL® 8414 is a urethane acrylate developed for liquid energy curable thermoforming inks. Flexographic inks made with EBECRYL® 8414 exhibit excellent thermoformability with draws up to 1" without cracking, blistering, separation or loss of adhesion. This medium viscosity oligomer has good pigment wetting capability and ink performance.

Basic Zinc Chromate 233 is primarily used in two component acid wash primers used to protect steel, galvanized surfaces and aluminum where provides improved adhesion to the topcoat as well. Since it provides protection on various substrates as well. Typical use levels 3-7

EBECRYL® 8311 is an aliphatic urethane acrylate nanocomposite that exhibits low viscosity and high reactivity in ultraviolet (UV) light or electron beam (EB) curable coatings. EBECRYL® 8311 can be easily incorporated into at any stage of formulating. Films of EBECRYL 8311 exhibit good weatherability, outstanding hardness, chemical, and scratch and abrasion resistance coupled with very low haze development after abrasion. EBECRYL® 8311is designed to be used as the main oligomer in formulations requiring a high degree of hardness, scratch, abrasion resistance and low development after abrasion

EBECRYL® 838 is a polyester hexaacrylate that exhibits fast cure response and moderate viscosity. Films of EBECRYL 838 cured by ultraviolet light (UV) or electron beam (EB) demonstrate good abrasion and scratch resistance, solvent resistance and hardness.

AP 5942 is cycloaliphatic, modified with epoxy resin stabilized polyamine adduct.

Vorite® 125 has been polymerized by a unique process, which imparts excellent thermal and viscosity stability. The Vorite® oils are polymeric plasticizers for cellulosics and elastomers in adhesives, sealants, gasket cements and belt dressings. They aid in plasticizing the reactants (polyol) for flexible urethane foams and elastomers. Other uses include lacquers, marking inks and plug valve lubricants.

EBECRYL® 4744 is an undiluted, unsaturated polyester acrylate designed for UV-curing and EB coatings.

Dynasylan® P is mostly used as crosslinker for silicones. Dynasylan® P is a special silicic acid ester. It is mainly used as crosslinker in the silicone industry. Dynasylan® P can be further used as precursor for inorganic binders and as basic ingredient in sol-gel formulations.

SURFYNOL® 104 is a multi-functional surfactant that combines dynamic wetting and molecular defoaming in waterborne coatings and inks. SURFYNOL® 104 is available in liquid form in different solvent cuts.

SUKOREZ® SU-110 is a waterwhite thermoplasic resin obtained from polymerization and hydrogenation of cyclic ingredients. The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure sensitive adhesive(HMPSA) and solvent based pressure sensitive adhesive(SBPSA), because of its good heat resistance and good compatibility with base polymers such as ethylene vinyl acetate(EVA), styrene block copolymer(SBC).

AP 5904 is a low viscosity, modified Cycloaliphatic amine adduct hardener for epoxy resin based lacquers and coatings.

SURFYNOL® 104 H is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in waterborne coatings and inks.

SILIKOTOP® E 900 is a binder and resin used in 2K coatings, protective coatings, solventborne coatings, and solventless and high solids coatings. It offers chipping resistance, high impact resistance, high viscosity, low VOC, and weather resistance.