Products

Silcolapse® 411 is a compound containing polydimethylsiloxane oil and a mineral filler in colloidal dispersion. It is intended mainly for treating anhydrous media, but also aqueous media, in numerous industries (oil, chemicals, metallurgy, etc.). Its low viscosity and its efficiency in alkaline media are of particular interest. Silcolapse® 411 is intended for industrial use only, and should not be used in the manufacture of foodstuffs, cosmetics or pharmaceutical products.

EBECRYL®741 is an adhesion promoting resin with excellent pigment dispersion properties for radiation curable screen inks. It is designed for general purpose application on many treated plastic substrates. It can also be used as a let-down resin in combination with EBECRYL® epoxy acrylates, polyester acrylates and urethane acrylates.

HFGEL 120-N is an organophilic clay optimized for use primarily in aliphatic and other non-polar to medium polarity solvent-based systems. HFGEL 120-N belongs to the newest generation of high performance organoclays, being easy to disperse and self-activating. It can be added at any point in the manufacturing process and can be used to correct finished batches. HFGEL 120-N imparts viscosity increase, sag control and prevents settling of pigments and fillers.

AP 5980 is low viscosity modified cyclo-aliphatic amine adducts hardener for epoxy resin based coatings. It exhibits high chemical resistance.

CYMEL® 328 resin is a methylated high imino melamine crosslinker supplied in water. Its high reactivity and low formaldehyde release during cure makes CYMEL® 328 resin suitable for a wide range of fast-curing waterborne industrial coating formulations, such as can and coil coatings, OEM and foil coating applications

AP 1563 is a low viscosity, reactive, Phenalkamine epoxy hardener solution for epoxy resins based lacquers and coatings.

Charge Modified Agent CM-138 is one kind of macromolecular compound specially prepared by a special method. It has a very strong surface charge modified effect, no catalysis for all powder coating, never affect coating film leveling, not to cause the filmyellowing, on the contrary it also has the effect of promoting the leveling, so by usingit ,more filler could be used and spraying effect is better.

Epoxy Hardener - AP 1057 is a low viscosity, reactive, phenalkamine hardener for epoxy resins based lacquers and coatings.

PLYAMUL® CPS-104 is an externally plasticized, hydroxyethyl cellulose stabilized, vinyl acetate homopolymer

AP 5970 is a nonyl phenol free low viscosity modified aliphatic polyamine mannish hardener for epoxy resin based coatings. It has high reactivity low viscosity and excellent chemical resistance.

HFGEL 120-0 is an organophilic clay designed for use primarily in systems containing aliphatic to aromatic solvents such as xylene, toluene, mineral spirits, and naphtha.

TEGO® Powder AID F05 is a hydrophobic fumed silica. It provides good free flow ability for powder coatings.

AP 5212 is a medium viscosity, reactive polyamide hardener for epoxy resins based lacquers and coatings.

CYMEL® 3745N Resin is a highly methylated melamine crosslinker designed for use in both solvent-borne and waterborne industrial finishes. Its high functionality and low tendency to self-condense promotes excellent formulated stability and results in films with very good hardness development, flexibility, formability, and resistance properties making it suitable for a wide range of coating applications, like can and container coatings, foil coatings, automotive coatings and waterborne formulations.

AP 2508 has very a low viscosity aliphatic amine hardener used in combination with epoxy resins for coatings and adhesives.