Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Chemical Name
- Function
- Hardener
- Product Code
- MITM13688
- Single Ingredient
- Yes
- Synonyms
- Amines, polyethylenepoly-, reaction products with C18-unsatd. fatty acid dimers
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Adhesive & Sealant End Applications
- Application Method
- Coating End Applications
- Compatible Substrates & Surfaces
- Markets
- Applications
- Product Applications
It is used in combination with liquid Epoxy resins or solids epoxy resin solution or epoxy resin modified by means of reactive as well as non-reactive diluents. Suitable for application with standard one-component airless spray systems. Ideal for marine and protective coatings e.g. structural steel, concrete surface. Can be used in Epoxy Polyamide type of Structural adhesives, Sealants, Putties, Casting, Laminating etc.
Properties
- Physical Form
- Product Properties
Epoxy coating systems cured with AP 5212 present the following features.
- Suitable for ambient temperature cure.
- High levels of mechanical stability.
- Good adhesion to marginally prepared surfaces.
- Resistance to aqueous alkaline, acid and saline solutions.
- Good corrosion resistance.
Safety & Health
- Handling Precautions
The hardener will absorb moisture and carbon dioxide when left in open containers. This may result in increased viscosity and sometimes crystallization. Use personal protective equipments and follow industrial hygienic procedures. Recommended to use safety glasses, protective clothing, gloves, & masks suitable for chemical, solvents & their vapor.
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S001795
- Principal
Storage & Handling
- Storage Conditions
- AP 5212 should be stored in a dry place, preferably in the sealed original container at temperatures 15 - 30°C. The Product should not be stored exposed to direct sunlight.
- Shelf life: (15 to 30°C): 24 Month.
- Hazardous decomposition products: (When in fire) Carbon monoxide, Carbon dioxide, Nitrogen Oxides and other toxic Gases & Vapors.
Other
- ADR/RID/ADN Proper Shipping Name
- Epoxy Hardener AP 5212, Environmentally hazardous substance, liquid, N.O.S. (fatty acids, C18-unsatd., dimers, reaction products with polyethylenepolyamines)
- ADR/RID/ADN UN Number
- UN3082
- Appearance
- Clear yellow colored liquid
- Color (SDS)
- Yellow
- IATA/ICAO Proper Shipping Name
- Epoxy Hardener AP 5212, Environmentally hazardous substance, liquid, N.O.S. (fatty acids, C18-unsatd., dimers, reaction products with polyethylenepolyamines)
- IATA/ICAO UN Number
- UN3082
- IMO/IMDG EmS Fire
- F-A
- IMO/IMDG EmS Spill
- S-F
- IMO/IMDG Proper Shipping Name
- Epoxy Hardener AP 5212, Environmentally hazardous substance, liquid, N.O.S. (fatty acids, C18-unsatd., dimers, reaction products with polyethylenepolyamines)
- IMO/IMDG UN Number
- UN3082
- Insoluble in (SDS)
- Water
- Item Number
- Odor
- Amine
- Odor (SDS)
- Ammonia - like
- Other Hazards
- Not applicable
- Temperature Control
- No
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions Amine Value 330.0-360.0 mg KOH/g mg KOH/g ISO 9702 - Optical Properties
Value Units Test Method / Conditions Color Scale max. 10.0 Gardner Gardner Color Scale max. 10.0 ASTM ASTM ASTM D1544 - Physical Properties
Value Units Test Method / Conditions Dry to Set Time 10.0 h h BK Dry Time Recorder at 25°C, Thin film 8 mils, 200 microns Wet Film Thickness Gelling Time 120.0 m m at 25°C, 150g Specific Gravity 0.96-0.98 - ASTM D1652 at 21°C Viscosity 35000.0-45000.0 mPa.s mPa.s DIN 53015 at 25°C Viscosity 35000.0-45000.0 mPa.s mPa.s ISO 12058 at 25°C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Density (SDS) 0.96-0.98 g/cm³ g/cm³ ASTM D1475 at 25°C Flash Point (SDS) min. 200.0 °C °C Viscosity (SDS) 35000.0-45000.0 mPa.s mPa.s ISO 12058 at 25°C - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 12.0 mo mo