Products

CYMEL® 301 Resin is a highly methylated melamine crosslinker supplied at >98% solids. Relative to CYMEL® 303 LF resin, CYMEL® 301 Resin is slightly higher in both monomer content and extent of alkylation resulting in a product with lower viscosity that exhibits fast cure response and imparts excellent flexibility to the film. Its high functionality and low tendency to self-condense makes CYMEL® 301 Resin suitable for a wide range of applications like can, container, automotive and general industrial coatings.

AEROSIL® R 202 Coating is a fumed silica after-treated with polydimethylsiloxane.

RHOPLEX® DCR-317 is an aqueous all-acrylic emulsion polymer designed for formulating into high solids Deck and; Concrete Restoration coatings. Restoration coatings can be formulated with RHOPLEX® DCR-317 Binder to help provide excellent flexibility and dirt pick- up resistance, in addition to adhesion to concrete and well-weathered wood.

TEGO® AddBond HS improves adhesion and flexibility of solvent borne coatings on steel, galvanized steel, aluminum, and plastics. It is highly suitable for high-solid coatings.

EBECRYL® 8411 is an aliphatic urethane diacrylate diluted 20% by weight with the reactive diluent isobornyl acrylate (IBOA). Films of EBECRYL® 8411 cured by ultraviolet light (UV) or electron beam (EB) exhibit exceptional extensibility and flexibility, in addition to excellent abrasion resistance, good adhesion, exterior durability and resistance to yellowing.

RHOPLEX® HG-98C is an acrylic emulsion polymer designed specifically for low solvent content, aqueous gloss enamels with excellent appearance and resistance properties. RHOPLEX® HG-98C uses ambient temperature crosslinking technology to offer improved performance versus conventional polymers. It has excellent hardness development and durability for high traffic interior applications.

AP 5608 is a low viscosity modified Cyclo-aliphatic amine adducts hardener for epoxy resin based coatings. The coating made from AP 5608 has very high gloss.

3M™ Glass Bubbles S28HS are high-strength additives for polymers made from a water-resistant and chemically stable soda-lime borosilicate glass. These hollow glass bubbles can be compounded with a variety of polymers to reduce the overall thermal conductivity of the composite. These composites can be coated or incorporated into deep sea oil pipelines to improve the flow assurance properties of the system.

EBECRYL® 893 is a modified polyester acrylate specifically developed for UV curable field applied concrete and vinyl composition tile (VCT) floor coatings. EBECRYL 893 provides resistance to yellowing upon cure and over its lifetime. The low viscosity of EBECRYL 893 also provides latitude to achieve low viscosity formulations, which are required for field applied applications. Concrete and VCT coatings based on EBECRYL 893 provide a good balance of properties such as cure speed, adhesion, hardness, and scratch resistance. Good chemical and solvent resistance and high gloss are also obtained with concrete and VCT coatings based on EBECRYL 893.

EBECRYL® 3605 is a partially acrylated ester of a bisphenol A type epoxy resin. It contains both acrylate and epoxy functionalities. This resin may be cured by exposure to either ultraviolet light (UV) or electron beam (EB) in conjunction with conventional epoxy curing. It may also be cured with UV radiation using a mixed photoinitiator system consisting of free radical and cationic photoinitiators. Ebecryl®3605 has been developed for applications requiring improved coating performance properties over those obtainable with conventional UV/EB curing alone.

Stainban™ 186 is a zinc free, odorless, aqueous tannin stain inhibitor additive for water based primers. The unique mechanism of this product allows it to effectively block tannins in stains, and pigmented coatings. It can be easily incorporated at any stage of the paint manufacturing process and is compatible with a wide range of surfactant and dispersants. StainbanTM 186 is effective at any PVC value of primers, however, it is more economical at higher PVC. It may reduce or eliminate the need for zinc oxide in primer formulations. Paints made with StainbanTM 186 have good storage stability and improved humidity resistance. It is HAPS free and does not contribute to VOC. Typical use level ranges from 1 - 4% based upon total formula weight.

Kalama® VITROFLEX® B is a unique blend of dibenzoates specially tailored for the polysulfide market. This benzoate plasticizer is useful particularly in the B-side component of 2K polysulfide sealants. Kalama® VITROFLEX® B imparts good rheology for suspension stability of dispersed solids, elasticity, fast cure rates, and hardness development.

Bleumina® 219 is a series of Medium/High Color Furnace (MCF/HCF) blacks that provide excellent esthetics, along with high durability, in the final product. With very low particle size and a balance of structure, it exhibits good UV protection, high jetness, and gloss.