Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Function
- Binder
- Product Code
- MITM11295
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Labeling Claims
- Product Benefits
- Provides ability to formulate high-build coatings for Deck & Concrete Restoration
- 100% Acrylic
- APEO-free*
- Excellent dirt pick-up resistance
- Excellent flexibility and crack resistance over well-weathered wood
- Excellent abrasion resistance
- Very good stain and chemical resistance
- Very good adhesion and blister resistance over well-weathered wood
* - Manufactured without the use of APEO surfactants
- Performance Highlights
The performance of RHOPLEX® DCR-317 Binder in a 43.5% PVC / 48% Volume Solids formulation (tinted to Cedar-tone) is shown in Figure below, in comparison to three commercially-available deck & concrete restoration coating products (also tinted to cedar- tone). The results shown in the figure show how RHOPLEX® DCR-317 Binder can provide a very good balance of properties that are needed for restoration coatings, highlighted by an excellent combination of flexibility and crack resistance along with dirt pick-up resistance.
Figure – Lab performance properties of RHOPLEX® DCR-317 Binder (—)in Cedar- tone starting point formulation (43.5% PVC/48% Volume solids, 50g/L VOC), compared to three commercially-available Deck & Concrete Restoration coatings.
Applications & Uses
- Coating End Applications
- Compatible Substrates & Surfaces
- Markets
- Applications
Properties
- Physical Form
Regulatory & Compliance
Safety & Health
- Safety Precautions
Empty containers may contain hazardous residues. This material and its container must be disposed in a safe and legal manner.
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000005
- Principal
Storage & Handling
- Storage Conditions
Store products in tightly closed original containers at temperatures recommended on the product label.
Other
- Appearance
- Milky white liquid
- Color (SDS)
- White
- Item Number
- Odor (SDS)
- Ammonia
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions pH 8.7-9.0 - - Physical Properties
Value Units Test Method / Conditions Density 8.8 lb/gal Film Forming Temperature 0.0 °C Viscosity 800.0 cPs Brookfield Viscometer at 30 rpm, 3 spindle - Material Composition
Value Units Test Method / Conditions Solid Content 60.5 %(W/W) - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) 100.0 °C Evaporation Rate (SDS) max. 1.0 % Butyl acetate = 1 Melting Point (SDS) 0.0 °C Relative Vapor Density (SDS) max. 1.0 - Air = 1 Specific Gravity (SDS) 1.0-1.2 - Water = 1 Vapor Pressure (SDS) 17.0 mm Hg at 20°C Viscosity (SDS) 400.0-1500.0 mPa.s Volatile Content (SDS) 39.0-40.0 % Water pH (SDS) 8.5-9.5 -