Products

EBECRYL® 109 is an acrylate - methacrylate monomer blend, containing 50% of trimethylolpropane triacrylate (TMPTA) and 50% hydroxyethyl methacrylate (HEMA). It polymerizes when exposed to sources of free radicals. EBECRYL® 109 is particularly useful in coatings where a good thermal and/or chemical resistance are important.

EBECRYL® 811 is an ultraviolet light (UV) or electron beam (EB) curable polyester acrylate for either wet or dry offset printing on plastic substrates. Inks made using EBECRYL® 811 obtain excellent adhesion to calendered vinyl, polystyrene, polyolefins, polycarbonate and PVC. The water balance of this product allows inks based upon it to be run on press with low amounts of fountain solution: a key parameter for printing on non-absorbent substrates.

EBECRYL® 3415 is a modified bisphenol A epoxy acrylate diluted with 40% 1, 6-hexanediol diacrylate (HDDA). This acrylated epoxy was developed for ultraviolet light (UV) curable screen printing, and exhibits excellent reactivity and good adhesion to various non-porous substrates. EBECRYL® 3415 meets all regulatory requirements and is no longer subject to the Significant New Use Rule (SNUR).

EBECRYL® 9103 is used in radiation-curable coatings. It functions as a monomer and oligomer in CASE ingredients.

EBECRYL® 5129 is a hexafunctional aliphatic urethane acrylate that provides extremely fast cure response when exposed to ultraviolet light (UV) or electron beam (EB). Cured films of EBECRYL® 5129 exhibit high hardness and resistance to yellowing plus outstanding scratch, abrasion and chemical resistance combined with a degree of flexibility not found in similar high functionality acrylates.

EBECRYL® 8606 is an aliphatic urethane tetraacrylate. Films of EBECRYL® 8606 cured by ultraviolet light (UV) or electron beam (EB) have a unique combination of hardness, toughness, flexibility, and abrasion resistance coupled with outstanding exterior durability properties. These performance properties make EBECRYL® 8606 ideal for applications such as paint protection, printed electronics, automotive interior film and embossing or thermoforming after cure.

TMPEOTA is a reactive diluent commonly used in ultraviolet light (UV) and electron beam (EB) energy curable coatings and inks. TMPEOTA can be used to impart crosslinking to energy curable coatings and inks while maintaining a degree of flexibility and toughness. Of the common triacrylate diluents used in energy curable formulations, TMPEOTA exhibits the highest reactivity and the greatest viscosity reduction of oligomers.

EBECRYL® 8402 is a low viscosity aliphatic urethane diacrylate. Films of EBECRYL® 8402 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, toughness and excellent exterior durability. Low viscosity coatings or enhanced performance via increased oligomer content are possible with EBECRYL® 8402, Note that EBECRYL® 8402 typically develops a semi-crystalline aspect upon storage.

IBOA is a monofunctional reactive diluent that polymerizes when exposed to sources of free radicals. The bicyclic structure of IBOA gives rise to polymers of increased Tg, while its monofunctionality minimizes crosslinking to provide coatings and inks with good hardness and resiliency combined with flexibility and impact resistance.

EBECRYL® 1360 is a silicone hexaacrylate that improves slip, substrate wetting and coating flow and leveling when used as an additive in formulations cured by ultraviolet light (UV) or electron beam (EB). Cured films containing EBECRYL® 1360 will exhibit a smooth, tack free surface, with good blocking resistance. Because of its acrylate functionality, the silicone cures into the polymeric backbone, thus eliminating the migration that free silicones often display in coatings. EBECRYL® 1360 is particularly effective in EB cured formulations.

EBECRYL® 8210 is an aliphatic urethane acrylate that exhibits low viscosity and high reactivity in ultraviolet (UV) light or electron beam (EB) curable coatings. Cured films of EBECRYL® 8210 demonstrate high hardness with good scratch, abrasion and chemical resistance. EBECRYL® 8210 also contains primary hydroxyl groups that can be utilized for dual cure polymerization. Dual cure can provide instantaneous tack-free coating surfaces via UV or EB exposure while reaction of the hydroxyl groups with a suitable isocyanate enables polymerization in regions of the coating where UV or EB energy exposure is insufficient or absent.

EBECRYL® 265 functions as a binder and resin in CASE ingredients. It offers abrasion resistance, excellent adhesion, improved flexibility, outdoor durability, and yellowing resistance. It is a non-yellowing grade.

UCECOAT® 7733 is a UV-curable polyurethane dispersion characterized by its outstanding stain resistances both in clear and white pigmented coatings, while still giving flexibility.

PETIA is a multifunctional reactive diluent with a high degree of acrylic unsaturation and finds use in a variety of ultraviolet light (UV) and electron beam (EB) curable coatings and ink systems where a high degree of crosslinking is desired. PETIA is a mixture of predominantly the tri- and tetra-acrylate esters of pentaerythritol. PETIA has a higher ratio of tri - to tetra-acrylate ester than the similar product EBECRYL 180, and therefore remains liquid at normal ambient temperatures.

EBECRYL® 168 is an acidic methacrylate adhesion promoter designed as an additive for ultraviolet (UV) and electron beam (EB) curable coatings on metal.