Products

Bayferrox® 6622 T is an inorganic pigment made from iron(III) oxide, used in various applications requiring pigmentation with iron-based compounds.

Dynasylan® VTMO is a bifunctional organosilane possessing a reactive vinyl group and a hydrolyzable inorganic trimethoxysilyl group. The dual nature of its reactivity allows Dynasylan® VTMO to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers), thus functioning as a crosslinking agent, adhesion promoter and/or surface modifier. Dynasylan® VTMO is a colorless, low-viscosity liquid with a typical aromatic odor.

RHOPLEX® R-225 is designed to be used in release coatings for masking tapes. It offers tape manufacturers the application advantages of water-based systems. This polymer is simple to formulate, requires no catalyst, and offers the good initial release and re-adhesion characteristics that are obtained with solvent-based release systems.

CYMEL® 323 is a crosslinking agent that offers fast cure, humidity resistance, improved film hardness, and solvent resistance in CASE ingredients.

Kalama® VITROFLEX® B is a unique blend of dibenzoates specially tailored for the polysulfide market. This benzoate plasticizer is useful particularly in the B-side component of 2K polysulfide sealants. Kalama® VITROFLEX® B imparts good rheology for suspension stability of dispersed solids, elasticity, fast cure rates, and hardness development.

Exolit® AP 422 is a fine-particle ammonium polyphosphate (phase II) produced by a special method. The product is largely insoluble in water and completely insoluble in organic solvents. It is colorless, non-hygroscopic and non-flammable.

EBECRYL® 450 is a fatty acid modified polyester hexaacrylate. Because of the special structure of the backbone and the high acrylic functionality, EBECRYL® 450 provides the proper hydrophilic-lipophilic balance necessary for lithography, combined with high reactivity when cured by ultraviolet light (UV) or an electron beam (EB). Lithographic inks based on EBECRYL® 450 display outstanding printing qualities, including excellent ink transfer, good dot definition, and proper tack and rheological properties.

Bleumina® 219 is a series of Medium/High Color Furnace (MCF/HCF) blacks that provide excellent esthetics, along with high durability, in the final product. With very low particle size and a balance of structure, it exhibits good UV protection, high jetness, and gloss.

Bayferrox® 3905 is an iron oxide yellow pigment, also known as ferric oxide yellow, and is categorized as Pigment Yellow 42. It is a single-ingredient pigment primarily used in plastics and elastomers.

Bleumina® 221 is a series of Medium/High Color Furnace (MCF/HCF) blacks that provide excellent esthetics, along with high durability, in the final product. With very low particle size and a balance of structure, it exhibits good UV protection, high jetness, and gloss.

EBECRYL® 8210 is an aliphatic urethane acrylate that exhibits low viscosity and high reactivity in ultraviolet (UV) light or electron beam (EB) curable coatings. Cured films of EBECRYL® 8210 demonstrate high hardness with good scratch, abrasion and chemical resistance. EBECRYL® 8210 also contains primary hydroxyl groups that can be utilized for dual cure polymerization. Dual cure can provide instantaneous tack-free coating surfaces via UV or EB exposure while reaction of the hydroxyl groups with a suitable isocyanate enables polymerization in regions of the coating where UV or EB energy exposure is insufficient or absent.

EBECRYL LEO® 10103 is a multifunctional acrylate that in the presence of an amine synergist can enable the UV curing of printing inks and coatings without, or with only a minimal amount, of photoinitiator. The elimination or reduction of photoinitiator decreases the potential for migration in indirect food contact applications. EBECRYL LEO® 10103can be used for low migration over print varnishes along with flexographic and offset inks in the entire color range, including white. EBECRYL LEO® 10103 at 10-20% by weight in a coating or ink can provide a good balance of surface and through cure.

ACRYLTAC® SP-400 is a carboxylated acrylic copolymer emulsion.

RHOPLEX® VSR-5102 is a 100% Acrylic Binder designed for low-VOC interior and exterior flat to semi-gloss coatings. RHOPLEX® VSR-5102 can be formulated with little or no coalescent to pass the most stringent VOC regulations and is manufactured without the use of APEO surfactants. RHOPLEX® VSR-5102 offers a good balance of abrasive scrub resistance and stain removal along with very good exterior durability and dirt pick up resistance facilitating the formulation of high quality, low-VOC and low odor interior and exterior paints.