Products

CYMEL® 301 Resin is a highly methylated melamine crosslinker supplied at >98% solids. Relative to CYMEL® 303 LF resin, CYMEL® 301 Resin is slightly higher in both monomer content and extent of alkylation resulting in a product with lower viscosity that exhibits fast cure response and imparts excellent flexibility to the film. Its high functionality and low tendency to self-condense makes CYMEL® 301 Resin suitable for a wide range of applications like can, container, automotive and general industrial coatings.

CARPOL® GP-5015 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 5000 Da. This triol is polymerized with propylene oxide and then capped with 15% ethylene oxide. The outcome is a polyol with enhanced reactivity. Main applications include C.A.S.E., however, CARPOL® GP-5015 may also be included as a component in other urethane products and applications.

Licocene® PE MA 4351 fine grain is a highly grafted maleic anhydride polyethylene wax with advantageous physical properties e. g. for powder coating applications. The maleic anhydride modified polyethylene creates structured surfaces in combination with titanium dioxide. The roughness depends on the ratio of titanium dioxide to Licocene® PE MA 4351 fine grain. Licocene® PE MA 4351 fine grain is used as an efficient coupling agent for glass-, wood-, natural fibre and inorganic filled PE compounds.

AEROSIL® R 202 Coating is a fumed silica after-treated with polydimethylsiloxane.

CIMBAR BF BLANC FIX is used as a filler and pigment in architectural coatings, automotive OEM coatings, industrial coatings, and paints and coatings. It is also applied in frictionizing processes.

Clearstrength® XT100 is a toughness modifier and toughener used in acrylics, epoxies (EP), and polyesters. It offers easier processing, good dispersibility, excellent toughness, and is highly versatile with low viscosity.

TEGO® Foamex 26 is defoamer concentrate based on polyether siloxane technology. Offers a good balance of effectiveness and compatibility. Especially for architectural paints.

DzBh Baling® SEBS YH-602T is a radial hydrogenated styrene/butadiene block copolymer with excellent tensile strength and MFR.

EBECRYL® 5850 is a high performing medium viscosity bio-based diacrylate. When properly formulated, coatings and inks based on EBECRYL® 5850 cured by ultraviolet light (UV) or electron beam (EB) energy display high reactivity with good hardness and scratch resistance.

Foral® 85 resin is a glycerol ester of hydrogentated gum rosin. It is an exceptionally pale, thermoplastic resin that has outstanding resistance to oxidation and to discoloration caused by heat and ageing. It can be used in a wide array of adhesive tackifier applications and in protective/barrier type coatings where light color and oxidation resistance are needed.

TEGO® AIREX 904 W is a very effective deaerator concentrate based on polyether siloxane technology. Very effective against micro-foam in combination. Offers good compatibility.

“AEROSIL® E 812 is a fumed silica post-treated with an organosilane (HMDS). It has a high specific surface area and exhibits exceptional hydrophobicity. The material is very easy to disperse

REAFREE® 6694 is a binder and resin used in powder coating applications.

EBECRYL® 745 is an acrylic polymer diluted 46% by weight with a 1/1 ratio of the reactive diluents 1,6-hexanediol diacrylate (HDDA)(1) and tripropylene glycol diacrylate (TPGDA) . EBECRYL 745 is used as the primary or modifying oligomer in ultraviolet light (UV) or electron beam (EB) curable formulations to increase adhesion on difficult substrates.

OREVAC® 18732 is a maleic anhydride grafted polypropylene.