Products

EBECRYL® 3603 is an epoxy novolac acrylate diluted 20% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA) . EBECRYL 3603 exhibits rapid cure upon exposure to ultraviolet light (UV) or electron beam (EB) and superior chemical and thermal resistance.

EBECRYL® 85 is a low viscosity amine modified polyether acrylate that provides high reactivity in low extractable, low odor energy curable coatings and inks. Coatings and inks based on EBECRYL® 85 exhibit a low odor after UV or EB curing.

EBECRYL® 3701 is a modified bisphenol A epoxy diacrylate. EBECRYL® 3701 imparts flexibility and toughness to ultraviolet light (UV) or electron beam (EB) cured coatings and inks while maintaining such desirable properties as fast cure response and superior chemical resistance that are typical of standard epoxy acrylates.

EBECRYL® 3700-25R is the bisphenol A epoxy diacrylate, EBECRYL® 3700, diluted 25% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA) (1) to provide a lower viscosity, easier handling product. EBECRYL® 3700-25R exhibits low odor and fast cure response. Films of EBECRYL® 3700-25R cured by ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, high surface hardness, and the superior chemical resistance typical of an epoxy resin.

EBECRYL® 3701-20T is the modified bisphenol A epoxy diacrylate, EBECRYL 3701, diluted 20% by weight with the reactive diluent trimethylolpropane triacrylate (TMPTA)(1) to provide a lower viscosity, easier handling product. Films of EBECRYL® 3701-20T cured by ultraviolet light (UV) or electron beam (EB) exhibit flexibility, abrasion resistance, high gloss, and superior chemical resistance.

EBECRYL® 809 is a modified polyester acrylate designed to exhibit greater flexibility and impact resistance than typical polyester acrylates. Films of EBECRYL® 809 cured by ultraviolet light (UV) or electron beam (EB) provide good flexibility, high gloss, toughness and surface hardness.

EBECRYL® 1300 is designed as the letdown oligomer for UV thermoformable ink applications, and should be used in conjunction with the pigment grind oligomer, EBECRYL® 8413. EBECRYL® 1300 exhibits good adhesion promoting properties. When used together with EBECRYL® 8413, non-blocking thermoformable inks can be developed. These thermoformable inks demonstrate scratch and temperature resistance, as well as excellent adhesion to a variety of plastic substrates without the necessity of corona discharge or flame pretreatment.

EBECRYL® 1871 is a hexafunctional polyester acrylate oligomer that provides high reactivity and the proper ink-water balance necessary for good lithographic printing. Lithographic inks based on EBECRYL® 1871 display excellent rheological properties ensuring good ink transfer from the printing plate to the blanket and then to the substrate, combined with good dot definition. EBECRYL® 1871 has been specifically developed to formulate low migration UV/EB curable inks for indirect food contact applications.

EBECRYL® 221 is a hexafunctional aromatic urethane acrylate oligomer which provides very fast cure response when exposed to ultraviolet light (UV) or electron beam (EB). Cured films of EBECRYL® 221 exhibit high hardness and solvent resistance.

EBECRYL® 3700 is the diacrylate ester of a bisphenol A epoxy resin, and exhibits low odor and exceptional cure response. Films of EBECRYL® 3700 cured by ultraviolet light (UV) or electron beam (EB) demonstrate high surface hardness, high gloss, and excellent chemical resistance. EBECRYL® 3700 finds broad use in UV/EB applications, such as coatings, overprint varnishes, inks, adhesives, and electronics.

CYMEL® UI-20-E Resin is a partially iso-butylated urea crosslinker designed for use in acid curing wood coatings with high film build requirements. Being supplied in ethanol, films dry very quickly resulting in coatings with excellent early block resistance.

CYMEL® 328 resin is a methylated high imino melamine crosslinker supplied in water. Its high reactivity and low formaldehyde release during cure makes CYMEL® 328 resin suitable for a wide range of fast-curing waterborne industrial coating formulations, such as can and coil coatings, OEM and foil coating applications

EBECRYL® 3720 is a bisphenol A epoxy diacrylate that is the industry standard in performance and consistency. It exhibits light color and fast cure response. Films of EBECRYL® 3720 cured via exposure to ultraviolet light (UV) or electron beam (EB) demonstrate high surface hardness, gloss and excellent chemical resistance. EBECRYL® 3720 finds broad use in UV/EB applications, such as inks, coatings, and overprint varnishes and offers improved formulation stability.

EBECRYL® 3418 is a modified bisphenol A epoxy diacrylate that exhibits excellent reactivity and reduced viscosity. Films of EBECRYL® 3418 cured by ultraviolet light (UV) or electron beam (EB) demonstrate high flexibility, gloss, toughness, adhesion and superior chemical and scratch resistance.

EBECRYL® LEO 10552 is a low viscosity amine modified polyether acrylate oligomer that provides low extractables, low odor and low migration after UV or EB curing. EBECRYL® LEO 10552 is recommended for use in low odor and low migrating UV overprint varnishes (OPV’s) and inks for indirect food packaging applications.