Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Function
- Oligomer, Monomer
- Product Code
- MITM10666
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Performance Highlights
- EBECRYL® LEO 10552 is characterized by:
- Low viscosity
- UV/EB cured products based onEBECRYL® LEO 10552 are characterized by then following performance properties:
- Good cure response
- Good flexibility
- High gloss
- Low extractables
- Low odor
- Low migration
- The actual properties of UV/EB cured products also depend on the selection of other formulation components such as reactive diluents, additives and photoinitiators.
- EBECRYL® LEO 10552 is characterized by:
Applications & Uses
- Coating End Applications
- Cure Method
- Ink & Toner End Applications
- Markets
- Applications
- Product Application
- EBECRYL® LEO 10552 is recommended as the main oligomer for low extractable, low odor overprint varnishes and as the letdown for flexographic inks for indirect food packaging and related applications.
- It is also suitable for screen and gravure application.
Properties
- Physical Form
Regulatory & Compliance
- Certifications & Compliance
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
- Quality Standards
Packaging & Availability
Principal Information
- Group Principal Number
- S000001
- Principal
Storage & Handling
- Storage and Handling Conditions
- Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids.
- This might cause uncontrollable polymerization of the product with the generation of heat.
- Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers.
- Procedures that remove or displace oxygen from the material should be avoided.
- Do not store this material under an oxygen free atmosphere.
- Dry air is recommended to displace material removed from the container.
- Wash thoroughly after handling.
- Keep container tightly closed.
- Use with adequate ventilation.
Other
- Appearance
- Clear liquid
- Appearance (SDS)
- Liquid
- Color (SDS)
- Pale yellow
- Item Number
- Odor (SDS)
- Ester acrylate
- Other Hazards
- Polymerization may occur from excessive heat, contamination or exposure to direct sunlight .
- USA/DOT UN Number
- Not Applicable
- Optical Properties
Value Units Test Method / Conditions Color Scale max. 3.0 Gardner Gardner Color Scale - Chemical Properties
Value Units Test Method / Conditions Free Amine Content 1438.0 %(W/W) Free Amine Content max. 1000.0 ppm as residue - Physical Properties
Value Units Test Method / Conditions Density 1.12 g/mL At 25°C Molecular Weight 1000.0 g/mol Viscosity 350.0-650.0 mPa.s At 25°C - Material Composition
Value Units Test Method / Conditions Residual Solvent Content max. 100.0 ppm - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) min. 100.0 °C Density (SDS) 1.1 g/cm³ Flash Point (SDS) min. 100.0 °C Setaflash Vapor Pressure (SDS) max. 0.133 hPa at 20°C Volatile Content (SDS) max. 0.5 %(W/W)