Products

CARPOL® PGP-3815 is a propylene glycol-initiated polyether polyol. CARPOL® PGP-3815 has a functionality of two and an average molecular weight of 3800 Da. This diol is polymerized with propylene oxide and then capped with 15% ethylene oxide.

EBECRYL® 640/20 TO is a modified diacrylate ester of bisphenol A epoxy resin. This product is characterized by its light color, fast cure response and improved pigment wetting. Films of EBECRYL®640/20 TO cured by ultraviolet light (UV) or electron beam (EB) exhibit high surface hardness and gloss and the excellent solvent resistance typical of an epoxy resin. EBECRYL®640/20 TO finds broad use in UV/EB applications, such as inks, coatings and overprint varnishes.

Dynasylan® HYDROSIL 2627 is an aqueous oligomeric aminoalkyl-functional silane hydrolysate. It is a colorless to slightly yellowish aqueous solution with an amine-like odour, miscible with alcohols or water.

Polycin® T-400 is a solventless, castor oil-based derivative designed for use as a polyol or viscosity modifier in polyurethane coating systems. Polycin® T-400 will impart higher hardness and strength, and as a reactive diluent, Polycin® T-400 provides VOC reduction along with the beneficial properties of castor oil derivatives, such as improved hydrophobicity, flow and levelling.

EBECRYL® 3708 is a modified bisphenol A epoxy diacrylate that exhibits relatively low viscosity and good cure response. Films of EBECRYL® 3708 cured by ultra- violet light (UV) or electron beam (EB) demonstrate good flexibility, high gloss, toughness, and superior impact resistance.

EBECRYL® 896 is a multifunctional monomer which polymerizes when exposed to sources of free radicals. It is composed primarily of the pentaacrylate and hexaacrylate esters of dipentaerythritol. EBECRYL® 896 is particularly useful in UV (ultraviolet) and EB (electron beam) curable inks and coatings where improved cure response, hardness and scratch/abrasion resistance are required.

CYMEL® 303 LF resin is a highly methylated, monomeric melamine crosslinker supplied in liquid form at ≥ 98% solids content. Its high extent of alkylation and low tendency to self-condense make CYMEL® 303 LF resin a highly effective crosslinking agent for a broad range of applications such as can, container, automotive and general industrial coatings. While CYMEL® 303 LF resin is insoluble in water, it shows excellent compatibility with water-soluble backbone polymers and provides very good stability in amine-stabilized waterborne formulations.

Dynasylan® P is mostly used as crosslinker for silicones. Dynasylan® P is a special silicic acid ester. It is mainly used as crosslinker in the silicone industry. Dynasylan® P can be further used as precursor for inorganic binders and as basic ingredient in sol-gel formulations.

EBECRYL® 3720 is a bisphenol A epoxy diacrylate that is the industry standard in performance and consistency. It exhibits light color and fast cure response. Films of EBECRYL® 3720 cured via exposure to ultraviolet light (UV) or electron beam (EB) demonstrate high surface hardness, gloss and excellent chemical resistance. EBECRYL® 3720 finds broad use in UV/EB applications, such as inks, coatings, and overprint varnishes and offers improved formulation stability.

EBECRYL® 452 is a low viscosity polyester acrylate oligomer that exhibits exceptional pigment wetting properties making it an ideal pigment grinding resin. EBECRYL® 452 also gives a fast cure response when formulated with other oligomers and cured via ultraviolet light (UV) or electron beam (EB). EBECRYL® 452 is used for the preparation of highly loaded pigment pastes produced using 3-roll or bead mills. EBECRYL® 452 can be used for grinding all process colors and spot colors.

EBECRYL® 3420 is a low viscosity, modified epoxy acrylate with good pigment wetting ability. In UV offset, the final ink produced with this resin exhibits an enhanced ink water balance and good misting. EBECRYL® 3420 can be used to produce a UV flexo ink with good flow, high gloss and high reactivity.

EBECRYL® 657 is a polyester tetraacrylate developed specifically for ultraviolet light (UV) and electron beam (EB) cured lithographic ink formulations. EBECRYL 657 provides the proper hydrophilic-lipophilic balance necessary for lithography, good pigment wetting, and low misting. It can be blended with epoxy acrylates or EBECRYL 436 or EBECRYL 438 to increase cure speed.

CYMEL® UI-19-I resin is a partially iso-butylated urea resin supplied in iso-butanol. The fast drying properties provide good block resistance and makes CYMEL® UI19-I resin suitable for ambient and low bake industrial wood finishes.

Castorcin™ 320 is a 100% solids, castor oil based reactive diluent that is a blend of primary and secondary hydroxyls with a low molecular weight, which gives this multi-functional polyol a high level of reactivity with high hardness and strength.

WANNATE® HT-400 is used in paints and coatings as a binder and resin, hardener, intermediate, and thinner. It is compatible with polyacrylates, polyester polyols, and polyurethanes (PU).