Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Function
- Oligomer, Monomer
- Product Code
- MITM00408
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Performance Highlights
EBECRYL® 452 is characterized by:
- Low viscosity
- Excellent pigment wetting properties
UV/EB curable formulated products containing EBECRYL® 452 are characterized by:
- Good cure response
The actual properties of UV/EB cured products also depend on the selection of other formulation components such as oligomers, additives and photoinitiators.
Applications & Uses
- Cure Method
- Product Applications
The ability to produce highly loaded pigment pastes allows the ink formulator more latitude in formulating as less pigment paste is required to achieve a given optical density.
Properties
- Physical Form
Technical Details & Test Data
- Roll Mill Pigment Paste Formulations
Typical 3 - roll Mill Pigment Paste Formulations
Yellow Magenta Cyan EBECRYL 452 53.3 50 47.8 Solsperse® 22000 1.7 Solsperse 5000 1.1 Solsperse 39000 4.6 Solsperse 24000 4.5 5.7 Irgalite® Yellow BAW 40.4 Irgalite Rubine L4BD 45.5 Irgalite Blue GLO 45.4
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000001
- Principal
Storage & Handling
- Storage Conditions
- Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids.
- This might cause uncontrollable polymerization of the product with the generation of heat. Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers.
- Procedures that remove or displace oxygen from the material should be avoided. Do not store this material under an oxygen free atmosphere.
- Dry air is recommended to displace material removed from the container. Wash thoroughly after handling. Keep container tightly closed. Use with adequate ventilation.
Other
- Appearance
- Clear dark liquid
- Appearance (SDS)
- Liquid resin
- Color (SDS)
- Yellow or brown
- IATA/ICAO Proper Shipping Name
- Environmentally hazardous substance, liquid, N.O.S.
- IATA/ICAO Technical name (N.O.S.)
- Acrylated resin
- IATA/ICAO UN Number
- UN3082
- IMO/IMDG Proper Shipping Name
- Environmentally hazardous substance, liquid, N.O.S.
- IMO/IMDG Technical name (N.O.S.)
- Acrylated resin
- IMO/IMDG UN Number
- UN3082
- Item Number
- Odor (SDS)
- Ester like
- Other Hazards
- Polymerization may occur from excessive heat, contamination or exposure to direct sunlight .
- TDG Canada Proper Shipping Name
- Environmentally hazardous substance, liquid, N.O.S.
- TDG Canada Technical name (N.O.S.)
- Acrylated resin
- TDG Canada UN Number
- UN3082
- USA/DOT Proper Shipping Name
- Environmentally hazardous substance, liquid, N.O.S.
- USA/DOT Technical name (N.O.S.)
- Acrylated resin
- USA/DOT UN Number
- UN3082
- Chemical Properties
Value Units Test Method / Conditions Acid Value max. 10.0 mg KOH/g mg KOH/g - Physical Properties
Value Units Test Method / Conditions Density 1.18 g/mL g/mL At 25°C Flash Point min. 100.0 °C °C Setaflash Viscosity 400.0-1000.0 cPs cPs At 25°C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) min. 100.0 °C °C Density (SDS) 1.0-1.2 g/cm³ g/cm³ Flash Point (SDS) min. 100.0 °C °C Vapor Pressure (SDS) 0.013 Pa Pa at 20°C Volatile Content (SDS) 0.1-0.3 %(W/W) %(W/W)