Products

EBECRYL® LEO 10551 is a low viscosity amine modified polyether acrylate oligomer that provides low extractables, low odor and low migration after UV or EB curing.EBECRYL LEO 10551 is recommended for use in low odor and low migrating UV overprint varnishes (OPV’s) and inks for indirect food packaging applications.

CYMEL® 1133 Resin is a highly methylated, n-butylated melamine crosslinker with a high degree of alkylation. It has a higher butoxymethyl content and higher monomer content compared to CYMEL® 1130 resin. Its hydrophobic nature combined with very good film appearance properties makes CYMEL® 1133 resin suitable for automotive topcoat applications and general metal finishes requiring improved durability and resistance properties.

RHOPLEX® K-3 is an acrylic crosslinking agent.

CYMEL® 1161 Resin is a highly monomeric, methylated/ iso-butylated melamine crosslinker with a high degree of alkylation. Its high monomer content allows for the formulation of high solids coatings with excellent appearance, recoat adhesion, and flexibility. CYMEL® 1161 Resin is especially recommended for automotive topcoats, general metal finishes, and coil coatings

EBECRYL® 745 is an acrylic polymer diluted 46% by weight with a 1/1 ratio of the reactive diluents 1,6-hexanediol diacrylate (HDDA)(1) and tripropylene glycol diacrylate (TPGDA) . EBECRYL 745 is used as the primary or modifying oligomer in ultraviolet light (UV) or electron beam (EB) curable formulations to increase adhesion on difficult substrates.

DB™ Oil is the highest grade of refined castor oil. It was developed for use in applications when a low acidity and moisture content are critical.

CARPOL® GP-3000 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 3000 Da. This triol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, CARPOL® GP-3000 may also be included as a component in other urethane products and formulations.

Polycin® GR-50 is a 100% solids, castor oil-based derivative designed for use as a primary polyol or reactive diluent in polyurethane sealants and adhesives systems. Polycin® GR-50 imparts low hardness and provides VOC reduction while offering the beneficial properties of castor oil derivatives, such as improved flow and levelling.

CYMEL® UM-15 resin is a highly methylated urea crosslinker supplied as a liquid at >96% solids. Its high solids combined with very fast cure makes CYMEL® UM-15 resin suitable in high solids, low temperature curing systems, like wood and paper coatings. CYMEL® UM-15 is hydrophilic in nature, completely water soluble, and has very good compatibility with water soluble anionic backbone polymers. This makes CYMEL® UM-15 resin suitable for waterborne applications, like paper and wood coatings, where speed of cure is very important.

EBECRYL® 284 is an aliphatic urethane diacrylate diluted 12% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA)(1). Films of EBECRYL® 284 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent exterior durability, toughness, and flexibility, and are resistant to yellowing.

CYMEL® MB-98 resin is a butylated melamine crosslinker with high degree of alkylation and very low free formaldehyde. It has been specially designed to improve the resistance properties of urea-based acid curing wood coating formulations.

TRIGLYCIDYL ISOCYANURATE (TGIC) JF-77 is an isocyanurate based crystalline polyepoxide compound, its molecular weight is 297(CAS Number:2451-62-9), it owns good heat resistance, weather resistance, adhesive and high temperature performance.

ROSHIELD™ 3275 is specifically designed for reaction with water- dispersible polyisocyanates for wood coating applications where early hardness and sandability are important, under mild drying conditions. Unlike nitrocellulose lacquers, solventborne 2-component polyurethanes, and solventborne acid catalyzed finishes, waterborne polyurethane coatings based on this acrylic polyol have extremely low VOCs and very good early print resistance. In addition, films based on this emulsion are water- white and resistant to yellowing. ROSHIELD™ 3275 cures under ambient conditions, but heat on-line is recommended for early pack-out. Applications for this excellent, cost/performance, 2- package system include clear, pigmented and flatted systems for office and laboratory furniture, kitchen cabinets and fine furniture.

CYMEL® 373 resin is a partially methylated melamine supplied in water. Its high reactivity combined with water solubility makes CYMEL® 373 resin suitable for a wide range of fast-curing waterborne industrial coating formulations.

CYMEL® UI-27-EI Resin is a partially iso-butylated urea resin supplied in a mixture of ethanol and iso-butanol. CYMEL® UI-27-EI Resin is suitable for use in both acid curing wood coating applications and general industrial primer and topcoat formulations. CYMEL® UI-27-EI Resin is not suitable for exterior applications.