Products

CARPOL® GSP-355 is a glycerin/sucrose-initiated polyether polyol. The high functionality of the initiators yields a resultant polyol with a nominal functionality of 4.5 and a typical hydroxyl number of 355. Due to this polyol’s high functional nature, it is typically used in rigid foam and its applications. Blending this polyol with other polyether polyols allows for foam systems with high to low degrees of crosslinking. In addition, CARPOL® GSP-355 is a neutral material, which presents the formulator with complete catalytic control over a system.

EBECRYL® 3720-TM40 is the bisphenol A epoxy diacrylate, EBECRYL 3720, diluted 40% by weight with the reactive diluent trimethylolpropane triacrylate (TMPTA)(1) to provide a lower viscosity, easier handling product. EBECRYL® 3720-TM40 exhibits fast cure response and light color. Films of EBECRYL® 3720-TM40 cured by ultraviolet light (UV) or electron beam (EB) demonstrate high gloss and surface hardness, and excellent chemical resistance.

CYMEL® UI-27-EI Resin is a partially iso-butylated urea resin supplied in a mixture of ethanol and iso-butanol. CYMEL® UI-27-EI Resin is suitable for use in both acid curing wood coating applications and general industrial primer and topcoat formulations. CYMEL® UI-27-EI Resin is not suitable for exterior applications.

CYMEL® 243-3 Resin is a partially n-butylated melamine-formaldehyde crosslinking agent supplied in high flash aromatic solvent. It has excellent compatibility and is recommended for thermosetting acrylic and alkyd topcoat finishes and metal decorating systems. Its high resistivity provides wide latitude in formulating electrostatic spray finishes.

EBECRYL® LEO 10551 is a low viscosity amine modified polyether acrylate oligomer that provides low extractables, low odor and low migration after UV or EB curing.EBECRYL LEO 10551 is recommended for use in low odor and low migrating UV overprint varnishes (OPV’s) and inks for indirect food packaging applications.

EBECRYL® 824 functions as a monomer and oligomer in CASE ingredients. It belongs to the chemical mixtures and blends family.

EBECRYL® 250 is an undiluted high molecular weight aliphatic urethane diacrylate resin, characterized by its light color and lower viscosity. Films of EBECRYL® 250 cured by exposure to ultraviolet light (UV), electron beam (EB) or by means of peroxide are soft and flexible, exhibiting the inherent non-yellowing properties typical of an aliphatic urethane. This resin is most often used as an additive to improve the flexibility of finished formulations.

Dynasylan® HYDROSIL 2627 functions as a surface modifier, coupling agent, and crosslinking agent in industrial additives.

CYMEL® U-21-510 Resin is a partially n-butylated urea resin supplied in a mixture of n-butanol and xylene. It has excellent compatibility with epoxy resins. It is recommended in primer formulations which are to be topcoated and re-baked. Low viscosity and epoxy solution compatibility make this product an ideal modifier.

CARPOL® GP-1500 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 1500 Da. This triol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, CARPOL® GP-1500 may also be included as a component in other urethane products and formulations.

WANNATE® HT-80BS is an aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in of 20% n-butyl acetate and solvent naphtha 100 (1:1), colorless to slightly yellowish clear liquid.

CARPOL® GP-6015-60 is a glycerine initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 6000. This triol is polymerized with propylene oxide and then capped with 15% ethylene oxide. The outcome is a polyol with enhanced reactivity. Main applications include C.A.S.E., as this polyol has low total unsaturation levels and an anti-oxidant package taylored for this type of market.

EBECRYL® 3720-TM20 is the bisphenol A epoxy diacrylate, EBECRYL 3720, diluted 20% by weight with the reactive diluent trimethylolpropane triacrylate (TMPTA)(1) to provide a lower viscosity, easier handling product. EBECRYL® 3720-TM20 exhibits fast cure response and light color. Films of EBECRYL 3720-TM20 cured by ultraviolet light (UV) or electron beam (EB) demonstrate high gloss and surface hardness, and excellent chemical resistance.

Polycin® D-290 is a 100% solids, castor oil-based derivative designed for use as a polyol or reactive diluent in polyurethane coating systems. Polycin® D-290, with its very low viscosity, will allow for the formulation of higher system solids with improved VOC reduction. Polycin® D-290 will also impart the beneficial properties of castor oil derivatives, such as improved flow and levelling.

EBECRYL® 4849 is an aromatic urethane diacrylate diluted 15% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA). Films of EBECRYL® 4849 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, toughness and abrasion resistance.