Products

CYMEL® 373 resin is a partially methylated melamine supplied in water. Its high reactivity combined with water solubility makes CYMEL® 373 resin suitable for a wide range of fast-curing waterborne industrial coating formulations.

CYMEL® UI-20-E Resin is a partially iso-butylated urea crosslinker designed for use in acid curing wood coatings with high film build requirements. Being supplied in ethanol, films dry very quickly resulting in coatings with excellent early block resistance.

CYMEL® 328 resin is a methylated high imino melamine crosslinker supplied in water. Its high reactivity and low formaldehyde release during cure makes CYMEL® 328 resin suitable for a wide range of fast-curing waterborne industrial coating formulations, such as can and coil coatings, OEM and foil coating applications

CYMEL® U-1050-10 Resin is a partially n-butylated urea resin supplied in n-butanol and is the HAPS compliant version of CYMEL® U-1050-10 Resin. CYMEL® U-1050-10 Resin has wide compatibility with other film formers and is useful in fast curing industrial baking finishes and low temperature curing conversion varnishes for wood.

Dynasylan® P is mostly used as crosslinker for silicones. Dynasylan® P is a special silicic acid ester. It is mainly used as crosslinker in the silicone industry. Dynasylan® P can be further used as precursor for inorganic binders and as basic ingredient in sol-gel formulations.

CYMEL® UI-19-I resin is a partially iso-butylated urea resin supplied in iso-butanol. The fast drying properties provide good block resistance and makes CYMEL® UI19-I resin suitable for ambient and low bake industrial wood finishes.

Dynasylan® SIVO 203 is a new multifunctional aminosilane adhesion promoter that can be used for a wide variety of applications. Dynasylan® SIVO 203 is mainly dedicated for use in adhesives and; sealants to improve the adhesion of hybrid products (e.g. silylated polyurethanes, MS Polymers), RTV-silicones, two-part polyurethanes and two-part epoxies to inorganic surfaces and some difficult plastic surfaces. In addition, Dynasylan® SIVO 203 can lead to fast sealant curing and high-crosslinked products and it imparts both additional flexibility and hydrophobicity.

CYMEL® MB-98 resin is a butylated melamine crosslinker with high degree of alkylation and very low free formaldehyde. It has been specially designed to improve the resistance properties of urea-based acid curing wood coating formulations.

CYMEL® U-1054 resin is a partially n-butylated urea crosslinking agent supplied in a mixture of n-butanol and ethanol. CYMEL® U-1054 resin is suitable for industrial heat cured primer formulations because of the excellent adhesion, water and corrosion resistance properties. In can coating formulations, CYMEL® U-1054 provides an excellent balance between adhesion and film flexibility, especially after several cure cycles.

CYMEL® 1130 resin is a methylated/n-butylated melamine crosslinker with a high extent of alkylation. Its hydrophobic nature makes for improved wetting and adhesion on metal substrates, and improved humidity and salt spray resistance. CYMEL® 1130 resin is insoluble in water but shows excellent compatibility and stability with water-soluble backbone polymers and is an excellent crosslinker for anodic electrodeposition coatings.

CYMEL® U-80 Resin is a highly n-butylated urea resin supplied at >96% solids content. Its high extent of alkylation and hydrophobic nature make the CYMEL® U-80 Resin suitable for a wide range of coating applications, including high solids primers for automotive, general industrial, and container coatings, providing improved film flexibility and adhesion to various substrates. CYMEL® U-80 resin is insoluble in water but can be used in emulsified form as a crosslinking agent in water-dispersible alkyds, acrylic resins, and in emulsion systems.

CYMEL® 27-802 resin is a general purpose partially n-butylated melamine resin supplied in a mixture of n-butanol and xylene . CYMEL® 27-802 combines fast curing speed with good resistance properties making it suitable for a wide variety of industrial bake finishes including decorative metal coatings

CYMEL® 202 Resin is a methylated/n-butylated, high imino melamine crosslinker supplied in n-butanol. Its hydrophobic nature combined with high reactivity, high solids content, and rather low formaldehyde release during the curing process makes CYMEL® 202 Resin suitable for a wide range of medium to high solids or waterborne baking applications, like can and container coating formulations, automotive coatings, and low cure systems to improve film appearance and resistance properties. CYMEL® 202 resin has a high tendency to self-condense at rather low baking temperatures, providing films with very good hardness, gloss, chemical resistance, and outdoor durability.