Products

AEROSIL® 300 VS is a single-ingredient, hydrophilic fumed silica (SiO₂) that serves as an anti-blocking agent, anti-caking agent, carrier, dispersant, flow promoter, and reinforcement agent. It is odor-free. This product is compatible with silicone elastomers and is commonly used in varnishes, printing inks, and cosmetic formulations. It enhances performance by improving flow, preventing caking, and reinforcing the structure of various applications.

D.E.R.® 727 Epoxy Diluent is a p-tert.-butyl-phenyl glycidyl ether based reactive diluent.

AEROSIL® 300 is a hydrophilicfumed silica with a specific surface area of 300 m²/g. Itprovides a verystrong rheologicaleffect.

Castorcin™ 208 is a 100% solids castor oil based reactive diluent having good compatibility and wetting. This polyol is a tetrahydroxy ester, with three primary and one secondary hydroxyl groups, making it an attractive material for chemical reactions.

Polycin® D-140 is a 100% solids, castor oil-based derivative designed for use as a polyol or reactive diluent in polyurethane systems. Polycin D-140, with its very low viscosity and secondary hydroxyl groups, will allow for the formulation of higher system solids with improved VOC reduction and longer pot-life. Polycin® D-140 will also impart the beneficial properties of castor oil derivatives, such as improved flow and levelling.

BONDERITE® S-FN SB-2 solvent is a special blend of solvents designed to offer optimum handling properties with a wide number of Henkel Corporation thermosetting coatings including BONDERITE® S-FN 330 ACHESON, BONDERITE® S-FN GP 1904 ACHESON, and others.

EBECRYL® 151 is a pigment grinding vehicle for energy curable inkjet inks. When used in conjunction with EBECRYL® 151 (a letdown vehicle), jettable, stable inks are obtained for use in drop-on-demand piezo inkjet systems.

EBECRYL® 110 is a monofunctional reactive diluent characterized by low viscosity and relatively low odor. EBECRYL® 110 is used in ultraviolet light (UV) or electron beam (EB) cured coatings to control viscosity and increase flexibility.

TPGDA-A is a difunctional reactive diluent with a branched alkyl polyether backbone. Polymerization occurs when TRIPROPYLENE GLYCOL DIACRYLATE is exposed to sources of free radicals. It is widely used as a primary diluent in the formulation of ultraviolet light (UV) and electron beam (EB) curable coatings and inks. TRIPROPYLENE GLYCOL DIACRYLATE is a grade of tripropylene glycol diacrylate with lower inhibitor content than the standard grade (TPGDA).

AEROSIL® 130 is a single-ingredient silicon dioxide (SiO₂) used as an anti-blocking agent, anti-caking agent, carrier, and dispersant. It is odor-free. This product is compatible with silicone elastomers and is commonly used in varnishes and printing inks. It enhances performance by improving flow and preventing caking in various formulations.

EBECRYL® 180 is a multifunctional reactive diluent with a high degree of acrylic unsaturation and finds use in a variety of ultraviolet light (UV) and electron beam (EB) curable coatings and ink systems where a high degree of crosslinking is desired. EBECRYL® 180 is a mixture of predominantly the tri- and tetra-acrylate esters of pentaerythritol. EBECRYL® 180 has a higher ratio of tetra- to tri-acrylate ester than the similar product PETIA, and therefore typically crystallizes at normal ambient temperatures.

NPG(PO)2DA is useful as a reactive diluent in formulating ultraviolet light (UV) and electron beam (EB) curable coatings and inks. NPG(PO)2DA provides efficient viscosity reduction of viscous resins, good flow and wetting, and greater flexibility than other common difunctional acrylate diluents.

EBECRYL® 118 is an aromatic monofunctional acrylate that can be used as a reactive diluent in ultraviolet light (UV) or electron beam (EB) curing formulations. EBECRYL® 118 is a good diluent for a variety of acrylated oligomers. In formulations, it can lower Tg and increase flexibility of the UV/EB cured polymer while maintaining strength and toughness and improving substrate adhesion.

EBECRYL® 113 is a low odor monofunctional acrylated aliphatic epoxy that can be used as a reactive diluent in ultraviolet light (UV) or electron beam (EB) curing formulations. EBECRYL® 113 is a good diluent for a variety of acrylated oligomers. In formulations, it can lower Tg, increase flexibility and improve adhesion to plastics.

TPGDA is a difunctional reactive diluent with a branched alkyl polyether backbone. Polymerization occurs when TPGDA is exposed to sources of free radicals. It is widely used as a primary diluent in the formulation of ultraviolet light (UV) and electron beam (EB) energy curable coatings and inks.