Products

DMMP Crude functions as an intermediate in base chemicals.

Bluesil™ FLD 48 V3 500 is a polydimethylsiloxane silicone oils with linears chains and reactive hydroxyl endgroups.

3M™ Boron Nitride Cooling Filler Flakes 200-3 is a engineered to improve thermal conductivity in polymers while maintaining or improving electrical insulation. Their unique properties make these additives suitable for many thermoplastic, elastomer and thermoset resins used in a wide variety of electrical and electronic applications including thermal interface materials (TIM), consumer electronics and automotive applications.

3M™ Boron Nitride Cooling Filler Agglomerates 50 is a versatile ceramic material offering thermal conductivity, temperature stability, chemical resistance, high reflectivity, light weighting and electrical insulation. The structure of layered hexagonal plates provides outstanding lubricating properties and is non-abrasive to tooling.

Filtered Neutral Oil is a refined grade of castor oil having a very low acid value making this product ideal for applications where a low acid value is required. Filtered Neutral Oil is also available as DRY - FNO with a moisture content of 0.02% maximum.

DERTOLINE® PLS is a deodorized and highly stabilized rosin esterified with pentaerythritol. It is a tackifying resin mainly suitable for hot melt adhesives based on EVA or styrene block copolymers.

Flexricin® 50 is the ester of a long chain fatty acid having both acid and hydroxyl functionality in the chain. Flexricin® 50 is a building block for modifying many performance properties of a broad range of industrial chemicals.

3M™ Boron Nitride Cooling Filler Flakes 500-15 is a engineered to improve thermal conductivity in polymers while maintaining or improving electrical insulation. Their unique properties make these additives suitable for many thermoplastic, elastomer and thermoset resins used in a wide variety of electrical and electronic applications including thermal interface materials (TIM), consumer electronics and automotive applications.

DERTOPOLINE® G is a polymerized rosin esterified with glycerol, is a high softening-point tackifier resin recommended for Hot Melt adhesives and for masterbatch formulations.

Bluesil™ FLD 48 V50 000 is a polydimethylsiloxane silicone oils with linears chains and reactive hydroxyl end groups.

Bluesil™ FLD 621 V100 is a α/ ω vinyl dimethylpolysiloxanes. They are available in viscosities from 20 mm²/s to 170 000 mm²/s. They are mainly used as base polymers for the production of silicone elastomers produced by a polyaddition crosslinking reaction, and as additives to modify organic polymer compounds.

Bluesil™ FLD 621 V1000 is a vinyl dimethylpolysiloxanes. They are available in viscosities from 20 mm²/s to 170 000 mm²/s. They are mainly used as base polymers for the production of silicone elastomers produced by a polyaddition crosslinking reaction, and as additives to modify organic polymer compounds.

Bluesil™ FLD 621 V600 is a α/ ω vinyl dimethylpolysiloxanes. They are available in viscosities from 20 mm²/s to 170 000 mm²/s. They are mainly used as base polymers for the production of silicone elastomers produced by a polyaddition crosslinking reaction, and as additives to modify organic polymer compounds.

DERTOPOLINE® P 125 is used in binders manufacturing, laboratory applications, polymer processing, and release agent manufacturing. It serves as a base chemical in adhesives, agrochemicals, binders, cleaning agents, coatings, cosmetics, fuels, lubricants, paper, paperboard, and rubber applications.