DERTOPOLINE® G

DERTOPOLINE® G is a polymerized rosin esterified with glycerol, is a high softening-point tackifier resin recommended for Hot Melt adhesives and for masterbatch formulations.

Principal: DRT FRANCE

Functions: Binder & Resin, Tackifier

Chemical Name: Resin acids and Rosin acids, polymd., esters with glycerol

Chemical Family: Glycerol Esters & Derivatives

End Uses: Adhesives, Agrochemicals, Binder, Cleaning Agent, Coatings, Cosmetics, Fuel, Hot Melt Adhesive, Lubricants, Paper, Paperboard, Rubber, Solventborne Adhesive, Varnishes

Compatible Polymers & Resins: Ethylene Vinyl Acetate (EVA), Styrene Butadiene Rubber (SBR), Styrene Butadiene Styrene (SBS), Styrene Isoprene Styrene (SIS), Synthetic Rubbers

Labeling Claims: Bio-based, Natural

Enhanced TDS

Identification & Functionality

Features & Benefits

CASE Ingredients Features
Labeling Claims

Applications & Uses

Properties

Packaging & Availability

Packaging Type

Principal Information

Group Principal Number
S002297
Principal

Storage & Handling

Storage and Shelf Life Conditions

Under cover and at temperature below 30°C. About 12 months, storage conditions and inventory control must be observed.

Other

ADR/RID/ADN UN Number
Not Available
Color (SDS)
Yellow
Explosive Nature (SDS)
Not explosive
Flammable Nature (SDS)
Not flammable
Item Number
Odor (SDS)
Light
Other Hazards
Resin dust may ignite on contact with electrostatic discharge or exposure to flame or other sources of ignition. Hot molten product: may burn if ignited.
Oxidizing Properties (SDS)
Non oxidising
Protect from Freezing
Yes
Temperature Control
Yes
USA/DOT UN Number
Not Available
Chemical Properties
ValueUnitsTest Method / Conditions
Acid Value12.0 mg KOH/gmg KOH/g
Optical Properties
ValueUnitsTest Method / Conditions
Color Scalemax. 8.0 GardnerGardner50 resin / 50 toluene
Physical Properties
ValueUnitsTest Method / Conditions
Glass Transition Temperature (Tg)70.0 °C°Cat 70°C, mid
Softening Point113.0 °C°CRing and Ball Test
Storage Temperature41.0-86.0 °F°F
Viscosity10.0-At 20°C
SDS Physical and Chemical Properties
ValueUnitsTest Method / Conditions
Autoignition Temperature (SDS)391.0 °C°CRegulation (EC) No. 440/2008, Annex, A.10
Flash Point (SDS)min. 200.0 °C°CClosed Cup
Log Partition Coefficient (Log Pow) (SDS)min. 6.5-OECD 117 at 25°C, n-Octanol-Water
Relative Density (SDS)1.08-OECD 109 at 21°C
Softening Point (SDS)110.0-120.0 °C°CRing and Ball Test
Vapor Pressure (SDS)max. 3.0-OECD 104 at 25°C
Shelf Life & Stability
ValueUnitsTest Method / Conditions
Shelf Life12.0-