Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Chemical Name
- Function
- Tackifier, Binder
- Product Code
- MITM12938
- Single Ingredient
- Yes
- Synonyms
- Resin Acid Pentaerythritol Esters
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
Applications & Uses
- Adhesive & Sealant End Applications
- Applicable Processes
- Base Chemicals End Uses
- Coating End Applications
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Industrial Additives End Use
- Markets
- Applications
- Product Uses
- EVA based hot melt for packaging,bookbinding, woodworking, labelling and hygiene products.
- Road Marking.
Properties
- Physical Form
- Soluble In
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S002297
- Principal
Storage & Handling
- Storage Conditions
- Under cover and at temperature below 30°C. About 15 months.
- Since this product is sensitive to gradual oxidation, a strict inventory control must be observed, especially in warm seasons (oldest material used first).
- This could affect some properties of the resin.
Other
- ADR/RID/ADN Proper Shipping Name
- Elevated temperature liquid
- ADR/RID/ADN UN Number
- UN3257
- Color (SDS)
- Yellow
- Flammable Nature (SDS)
- Not classified flammable
- Insoluble in (SDS)
- Water
- Item Number
- Odor (SDS)
- Pine light
- Other Hazards
- Fine particles and powder may cause skin irritation by mechanical abrasion. However, based on available data, the classification criteria are not met., Fine particles and powder may cause eye irritation by mechanical abrasion. However, based on available data, the classification criteria are not met., Inhalation (dust or vapours/fumes generated by heated products) may cause respiratory irritation with throat discomfort, coughing or breathing difficulty., Hot molten product: Burns may cause irreversible eye injury and blindness. Causes skin burnsHot molten product: Burns may cause irreversible eye injury and blindness. Causes skin burnsHot molten product: Burns may cause irreversible eye injury and blindness. Causes skin burns, This product may be stored or transported at temperatures up to 190°C. Accidental splashing may cause severe burn., Resin dust may ignite on contact with electrostatic discharge or exposure to flame or other sources of ignition. Hot molten product: may burn if ignited.
- USA/DOT UN Number
- Not Applicable
- Optical Properties
Value Units Test Method / Conditions Color Scale 2.5 Gardner Gardner 50 resin/50 toluene - Chemical Properties
Value Units Test Method / Conditions Acid Number 10.0 mg KOH/g mg KOH/g - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 15.0 mo mo - Physical Properties
Value Units Test Method / Conditions Glass Transition Temperature (Tg) 50.0 °C °C mid Molecular Weight 1100.0 g/mol g/mol Softening Point 95.0 °C °C Ring and Ball Test Viscosity 500.0 mPa.s mPa.s At 160°C Viscosity 9.0 mPa.s mPa.s at 20°C, 50 resin / 50 toluene - Material Composition
Value Units Test Method / Conditions Renewable Content 99.0 % % ASTM D6866-21b - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Decomposition Temperature (SDS) min. 300.0 °C °C Flash Point (SDS) min. 200.0 °C °C Log Partition Coefficient (Log Pow) (SDS) 3.62 - at 20°C, n-octanol/water Relative Density (SDS) 1.0-1.1 - at 20°C Softening Point (SDS) 92.0-98.0 °C °C Surface Tension (SDS) 72.2-74.0 mN/m mN/m Vapor Pressure (SDS) max. 75.0 Pa Pa At 20°C