Products

Vorite® 63 is a lubricant and plasticizer compatible with urethanes, used in primers and lacquers.

CARPOL® EDAP-800 is an ethylenediamine-initiated polyether polyol. The resulting material has a nominal functionality of four and a typical hydroxyl number of 800. This tetrol is polymerized with ethylene and propylene oxides and is autocatalytic due to its amine content. This polyol’s functionality makes it optimal for use in rigid foams as a crosslinking modifier. In addition, CARPOL® EDAP-800 can also be used as a curative for most C.A.S.E. applications.

Polyfill 402SM is a alumina trihydrate and leading flame retardant and smoke suppressant product used in a wide range of industrial applications.

3M™ Boron Nitride Cooling Filler Platelets 003 is a versatile ceramic material offering thermal conductivity, temperature stability, chemical resistance, high reflectivity, lightweighting and electrical insulation. The structure of layered hexagonal plates provides outstanding lubricating properties and is non-abrasive to tooling.

Hostanox® O 3P is a highly efficient phenolic antioxidant with high resistance against hydrolysis, providing long term heat stabilization to polyolefins and polyamide especially for applications where the final article comes in contact with extractive media such as water, fat etc.

Polyfill 402 is a series alumina trihydrate products are used extensively in elastomers, thermoset plastics, thermoplastic and coating applications where optimum physical properties and surface finish qualities are critical. Use of fine grind Polyfill series products increases flame retardancy and smoke suppression. Polyfill/PolyJet alumina trihydrate products are tightly controlled by Cimbar Performance Minerals ISO 9001:2015 quality program.

Polyfill 405SM is a alumina trihydrate and leading flame retardant and smoke suppressant product used in a wide range of industrial applications.

PEBAX® MV 1074 SA 01 is a thermoplastic elastomer made of flexible and hydrophilic polyether and rigid polyamide. Pebax® MV 1074 SA 01 resin is also an inherently dissipative polymer and can be dry blended or compounded with a polymer matrix to lower the surface resistivity of the final part. This hydrophilic grade when extruded into either a thin film or laminated on to a substrate offers excellent permeability to moisture vapor while remaining waterproof .

Licolub® PED 1301 powder is an oxidized, high density polyehtylene wax with high molecular weight and high viscosity.

ZINC OXIDE GRADE 104 Treated is a brilliant white powder manufactured by the French (Indirect) Process. ZINC OXIDE GRADE 104 Treated is our most popular medium particle size zinc oxide offering high assay and very low impurities. Grade 104 meets GMP 21CFR110, is USFDA approved as GRAS (Generally Recognized As Safe) at 21cfr182.8991 and is authorized by the USFDA for use wherever GRAS is approved including food contact in rubber, plastics, and coatings. Grade 104 also meets the requirements of ASTM specification D79, 2002/95/EC Restriction of Hazardous Substances Directive (RoHS) for heavy metals and Waste Electrical and Electronic Directive (WEEE), and other regulations where high quality zinc oxide is required.

WANAMINE™ 8100 is a curing agent and surfactant used in adhesives, sealants, plastics, and elastomers.

Licowax® PE 520 powder is a polyethylene wax.

AEROSIL® R 974 Coating is a hydrophobicfumed silica after-treated with DDS (dimethyldichlorosilane).

DERCOLYTE® A 125 is produced from the polymerisation of alpha pinene. It is a tackifying resin especially recommended to improve the adhesive properties (tack, adhesion) of hot melt formulations or solvent based adhesives.

AEROSIL® 300 is a hydrophilicfumed silica with a specific surface area of 300 m²/g. Itprovides a verystrong rheologicaleffect.