Enhanced TDS
Identification & Functionality
- Blend
- No
- Carrier
- Chemical Family
- Chemical Name
- Country of Origin
- Product Code
- MITM13853
- Product Functions
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Product Features
- Key Features
Polyfill’s even distribution and free flowing properties permits higher loading levels without the generation of higher viscosities.
Applications & Uses
- Product End Uses
- Markets
- Applications
- Product Applications
- Adhesives
- Caulks & Sealants
- Carpet Backing/latex Compounding
- Cast Polymers/cast Epoxies
- Ceramics
- Cipp Rehabilitation
- Elastomers
- Flooring
- Paints & Coatings
- Rubber
- Thermoplastics
- Thermoset Plastics (Bmc/smc, Extrusion, Pultrusion, Rtm, Spray-upapplication
- Fiberglass Reinforced Plastic (Frp) Applications
- Vinyl Applications
- Wire and Cable
Properties
- Physical Form
- Soluble In
Regulatory & Compliance
- Compliance (Regulatory)
- Manufacturing Facility Standards
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S002777
- Principal
Other
- Appearance (SDS)
- White grains
- Explosive Nature (SDS)
- Not explosive
- Item Number
- Odor (SDS)
- Odorless
- Other Hazards
- Exposure may aggravate those with pre-existing eye, skin, or respiratory conditions.
- Processing & Application Methods
- Protect from Freezing
- No
- Temperature Control
- No
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions Loss on Ignition 34.6 % by Water - Material Composition
Value Units Test Method / Conditions Aluminum Content 64.9 % Ferric Oxide Content 0.009 % Silica Content 0.01 % as silicon dioxide Soda Content max. 0.3 % Soluble Soda Content max. 0.05 % as sodium dioxide - Optical Properties
Value Units Test Method / Conditions Brightness 98.0 % Hunter "L" - Physical Properties
Value Units Test Method / Conditions Bulk Density 0.38 lb/ft³ Bulk Factor 0.0495 gal/lb Median Particle Size 3.0 µm Sieve Fractionation (Retained) 0.0 % +100 mesh Sieve Fractionation (Retained) 0.0 % 325 mesh Sieve Fractionation (Retained) 0.0 % + 200 Mesh Specific Gravity 2.42 - - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Density (SDS) 2.4 g/cm³ Melting Point (SDS) 3450.0 °F after loss of water of hydration at elevated temperatures - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 0.0 d