Products

Zochem Grade 102T is a brilliant white powder manufactured by the French (Indirect) Process. Grade 102 offers high assay, very low impurities, and fine particle size with the highest French Process m2/g surface area (“SA”) available. Grade 102 replaces grades KADOX 911. Zochem Grade 102T is also available with processing aid/surface treatment.

SIPERNAT® 44 MS is a Zeolite of high purity. SIPERNAT® represents a specific product range of precipitated silica, aluminium and calcium silicates.

ZHENGDA® ZD-123 is characterized by repeating oxypropylene units in the backbone. ZHENGDA® ZD-123 Amine-terminated Polyether is a difunctional, primary amine with an average molecular weight of about 230. The primary amine groups are located on secondary carbon atoms at the end of the aliphatic polyether chain.

Dynasylan® HYDROSIL 2627 functions as a surface modifier, coupling agent, and crosslinking agent in industrial additives.

Baerolub® FTA Veg Prill is a relatively high bulk density, free flowing prills.

Licowax® PED 192 flakes is a oxidized polyethylene wax with high viscosity.

PURMOL™ 3ST is a potassium (K) type A zeolite with a pore size of approximately 3 Angstroms (0.32 nm). Purmol 3ST is recommended for use with high quality coatings. In general, we recommend the addition of 2.5% - 5% Purmol powder to the polyol component. This must be stirred thoroughly for a minimum of two hours to allow the Purmol to adsorb all the water before addition of the isocyanate.

LOTADER® 3210 is a random ethylene-butyl acrylate-maleic anhydride terpolymer. LOTADER® 3210 is a versatile adhesive for extrusion coating or lamination, designed as: Concentrate to be used in dry blend with LDPE. LOTADER® 3210 improves adhesion of LDPE on aluminum foils, metallized or primerized films. Ready for use resin to be used pure. LOTADER® 3210 gives excellent adhesion on substrates likes aluminum foil, metallized plastics, paper, board, PE and some plastic films like BOPP. Coextrusion tie layer for PE/PA in extrusion coating process. LOTADER® 3210 can also be used as a coupling agent for mineral filled compounds such as halogen free flame retardant wires and cables, a compatibiliser for polyamide/polyolefin blends and a modifier for polyamides.

GENIOPLAST® PELLET S is a pelletized silicone gum formulation with an outstanding high loading of ultrahigh molecular weight siloxane polymer.

KRONOS® 2220 is an economical universal pigment for plastics which require high outdoor durability and very good optical properties.

Exolit® AP 750 is a non-halogenated flame retardant based on ammonium polyphosphate as main component, which develops its effectiveness through phosphorus/nitrogen synergism. In contrast to similar competitive material, it shows high processing stability. Exolit® AP 750 differs in its mode of action from non phosphorus-based flame retardants (e. g. brominated, chlorinated or mineral FRs like ATH) by achieving its effect through intumescence. Material containing Exolit® AP 750 will foam on exposure to flame. The carbon-rich foam layer so formed will protect the polymer and in many cases the substrate below through its heat insulating effect, reduces further oxygen access and prevents dripping in case of a thermoplastic based formulation. Beyond the primary effects on fire behavior such as reduction of flame propagation rate, rate of heat release, dripping behavior, residual lengths of test specimens after flame tests etc., positive secondary fire effects such as low smoke density, no release of corrosive off-gasses, lower formation of toxic smoke gasses are of great interest.

Pale 4 polymerized castor oil oxidative polymerization of castor oil yields products with increased viscosities and decreasing solubility in aliphatic solvents. Pale 4 polymerized castor oil is used to plasticize a variety of resins in adhesive and sealant systems, inks and hot melts. It is a processing aid and plasticizer for rubber polymers.

Licolub® PED 2001 powder is an oxidized, high density polyehtylene wax with high molecular weight and high viscosity.

ZHENGDA® ZED-901 is an aliphatic polyether diamine derived from a propylene oxidecapped polyethylene glycol. It is water soluble, with an approximate molecular weight of 900 and a melting point around room temperature. Polyetheramines of this type are useful in a variety of polymers because of the hydrophilicity and flexibility imparted by the polyethylene glycol chain. In polyamides, for example, antistatic properties and moisture vapor transmission can be enhanced by incorporation of PEG-based polyetheramines.

Baerostab® X AB/5A is a butyltin mercaptide stabilizer designed for use in polyvinyl chloride (PVC) applications. It enhances the color strength and provides stability in various PVC products such as fascia mats, siding, and window profiles. This stabilizer is effective in improving the durability and processing of PVC, offering high color strength in the end products.