Products

Pale 1000 Blown Castor Oil commonly known as blown oils have increasing viscosities resulting from oxidative and crosslink polymerization at the double bonds and hydroxyl groups. Oxidative polymerization of castor oil yields products with increased viscosities and decreasing solubility in aliphatic solvents, increasing compatibility with various resins and improved ability to wet and disperse pigments while imparting solvent and abrasion resistance to lacquer systems. The polymerized oils are used to plasticize a variety of resins in adhesive and sealant systems, inks and hot melts. The heavier viscosity polymerized oils are processing aids and plasticizers for rubber polymers, imparting oil and solvent resistance.

EBECRYL® 246 is a difunctional aliphatic urethane acrylate that does not contain any intentionally added organic tin compounds, heavy metals*, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). (Please note that quinones are present in many raw materials, so the overall quinone content is reduced, but not zero in EBECRYL 246.) Films of EBECRYL 246 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent abrasion resistance, toughness and flexibility, and are resistant to yellowing.

EBECRYL® 8702 is an aliphatic urethane hexaacrylate that offers a multitude of performance properties allowing the formulator the flexibility to meet requirements. Films using EBECRYL® 8702 cured by ultraviolet light (UV) or electron beam (EB) exhibit a combination of hardness, abrasion and impact resistance coupled with good exterior durability.

ORGASOL® 1002 D NAT 1 is an ultrafine powder of polyamide 6 with a narrow particle size distribution and nearly round particle shape.

UCECOAT® 7230 is a UV/EB energy curable polyurethane dispersion with low tack before cure and after water evaporation. It has been developed for high hardness top coats on plastics, wood and other substrates, including both transparent and pigmented. UCECOAT® 7230 demonstrates high reactivity, good compatibility and good colloidal stability. The cured coating exhibits high gloss and very high hardness, abrasion resistance, chemical resistance, as well as good adhesion on plastics.

ORGASOL® 2001 UD NAT 2 is an ultrafine powder of polyamide 12, with a narrow article size distribution and nearly round particle shape.

Pale 4 polymerized castor oil oxidative polymerization of castor oil yields products with increased viscosities and decreasing solubility in aliphatic solvents. Pale 4 polymerized castor oil is used to plasticize a variety of resins in adhesive and sealant systems, inks and hot melts. It is a processing aid and plasticizer for rubber polymers.

EBECRYL® 896 is a multifunctional monomer which polymerizes when exposed to sources of free radicals. It is composed primarily of the pentaacrylate and hexaacrylate esters of dipentaerythritol. EBECRYL® 896 is particularly useful in UV (ultraviolet) and EB (electron beam) curable inks and coatings where improved cure response, hardness and scratch/abrasion resistance are required.

UCECOAT® 7200 is a novel energy curable solvent-free urethane acrylate in water developed for hardcoat applications. This urethane acrylate is highly reactive upon cure and exhibits high scratch and abrasion resistance after curing. Due to its low viscosity, it can be used as the main binder in waterborne hardcoat formulations for spray or curtain coater. UCECOAT® 7200 can be blended with other waterborne UV resins (after pH neutralization) to increase solids content and/or hardness property.

EBECRYL® 8411 is an aliphatic urethane diacrylate diluted 20% by weight with the reactive diluent isobornyl acrylate (IBOA). Films of EBECRYL® 8411 cured by ultraviolet light (UV) or electron beam (EB) exhibit exceptional extensibility and flexibility, in addition to excellent abrasion resistance, good adhesion, exterior durability and resistance to yellowing.

Ceridust® 6721 is a micronized, amide modified polypropylene wax.

EBECRYL® 8311 is an aliphatic urethane acrylate nanocomposite that exhibits low viscosity and high reactivity in ultraviolet (UV) light or electron beam (EB) curable coatings. EBECRYL® 8311 can be easily incorporated into at any stage of formulating. Films of EBECRYL 8311 exhibit good weatherability, outstanding hardness, chemical, and scratch and abrasion resistance coupled with very low haze development after abrasion. EBECRYL® 8311is designed to be used as the main oligomer in formulations requiring a high degree of hardness, scratch, abrasion resistance and low development after abrasion

EBECRYL® 838 is a polyester hexaacrylate that exhibits fast cure response and moderate viscosity. Films of EBECRYL 838 cured by ultraviolet light (UV) or electron beam (EB) demonstrate good abrasion and scratch resistance, solvent resistance and hardness.

EBECRYL® 4744 is an undiluted, unsaturated polyester acrylate designed for UV-curing and EB coatings.

NANOCRYL® C 150 shows the highest performance in scratch- and abrasion-resistance without influencing gloss or transparency of the cured UV-coating.