Products

EBECRYL® 3420 is a low viscosity, modified epoxy acrylate with good pigment wetting ability. In UV offset, the final ink produced with this resin exhibits an enhanced ink water balance and good misting. EBECRYL® 3420 can be used to produce a UV flexo ink with good flow, high gloss and high reactivity.

RHOPLEX® SG-10AF is a versatile 100% copolymer that was designed for use in high-quality interior/exterior semigloss paints. RHOPLEX® SG-10AF provides paint formulators with an opportunity to achieve excellent early and ultimate block resistance, and very good flow and leveling. RHOPLEX® SG-10AF establishes a new level of performance for aqueous semigloss applications.

RHOPLEX® MV-23LO is an aqueous, all-acrylic binder designed for interior and exterior wood primers and stain-blocking sealers. It is a versatile vehicle that can be used in both the formulation of primers that upgrade difficult substrates into sound repaint surfaces, and stain blocking sealers that minimize the "bleed through" of wood tannins and common household stains.

ACRYSOL™ RM-995 offers both enhanced viscosity stability to colorant addition and improved sag resistance to broad-wall paints. ACRYSOL™ RM-995 is a solvent-free (Manufactured without added solvent), hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier based on proprietary technology. This KU-builder rheology modifier offers the properties that HEUR technology is known for, e.g., excellent flow, gloss development and applicability both interior and exterior, with improved performance in viscosity stability upon tinting and excellent sag resistance.

EBECRYL® 1859 is a high molecular weight acrylate especially developed for high speed UV, HUV, UV LED, and EB cured offset lithographic inks. EBECRYL® 1859 exhibits excellent lithographic behavior, very good pigment wetting and high reactivity.

AP 5946 is a low viscosity, non-blushing, cycloaliphatic amine modified hardener for epoxy resin based lacquers and coatings.

ORGASOL® 2002 D NAT 1 is a spheroïdal powder of polyamide 12, with 20 um as average diameter and a narrow particle size distribution. An extremely high level of quality is achieved thanks to our rigorous control of particle size distribution, providing excellent consistency in performance.

AP 5910 is a low viscosity, modified aliphatic amine hardener for epoxy resins based lacquers coatings.

RHOPLEX® SG-30 is a revolutionary emulsion designed to meet the needs of new regulations for 150 g/L VOC semigloss interior and exterior architectural paints. RHOPLEX® SG-30 provides paint manufacturers an opportunity to formulate at lower VOC while maintaining key properties of conventional (250 g/L VOC) semigloss architectural paints.The results of laboratory tests comparing the performance properties of RHOPLEX® SG-30 formulated to 150 g/L VOC to a conventional 250 g/L VOC semigloss emulsion are included in this bulletin.

NuTone®390 is a low-structure powder specialty black. Its low structure and dispersion ability make this NuTone® 98 the best-optimized product between color, viscosity, and blue undertone in a variety of ink applications.

AVANSE™ ST-410 is a new high-performance, 100% acrylic, waterborne polymer can be formulated to meet the toughest VOC standards and still outperform traditional solvent and waterborne semitransparent stain technologies. Semitransparent stains based on AVANSE™ ST-410 Acrylic Emulsion do not require coalescent or heavy metal driers, they are easy to apply, and they enhance the appearance of new and weathered wood with a long-lasting finish. In addition, the combination of morphology and unique particle stabilization maximizes the flow and lapping characteristics during application, while building early resistance properties upon drying.

AP 5768 is an extremely low viscosity modified cycloaliphatic amine curing agent for epoxy resin based lacquers and coatings.

HP7622 is a high solids, water-reducible polyester dissolved in glycol ether EB (butoxyethanol). It is soluble in water after neutralization with amine. Stability and solubility in water may be improved with additional glycol ether EB or 2-butanol. It is a very linear polymer and provides excellent flexibility when combined with amino resins in baking finishes.