Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Carrier
- Chemical Family
- Function
- Thickener
- Product Code
- MITM11262
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Labeling Claims
- Key Features and Benefits
Features:
- High sag resistance
- Low roller spatter
- Excellent thickening efficiency
- Excellent color acceptance and low color float
- Appealing in-can structure
- Provided as low-viscosity liquid
- Manufactured without the use of solvent or APEO surfactants
Benefits:
- Lower formulation cost than cellulosic thickeners
- Excellent brush and roller loading and transfer
- Excellent long-term viscosity stability
- Good film-build for good hiding
Applications & Uses
- Application Method
- Coating End Applications
- Compatible Substrates & Surfaces
- Markets
- Applications
- Formulation Information
- Since ACRYSOL™ DR-110 Rheology Modifier is an alkali-soluble emulsion, it requires pH between 8 and 10 for efficient thickening. At the mill base stage, if extenders such as calcium carbonate are present, the alkaline nature of the mill base is typically sufficient to allow ACRYSOL DR-110 Rheology Modifier to give a mill base viscosity high enough for good dispersion without the need for additional base.
- However, after the dispersion is completed, if necessary, addition of a base is suggested to raise the pH to between pH 8 and 10. If incorporating ACRYSOL DR-110 Rheology Modifier in the letdown stage, diluting it with water 1:1 prior to addition is recommended.
- The letdown should also be adjusted to be between pH 8 and 10 with the addition of additional base as needed. ACRYSOL DR-110 Rheology Modifier is supplied as a low viscosity liquid that is easy to pour and pump.
- It is especially attractive to use when bulk handling and automatic metering equipment are employed.
Properties
- Physical Form
- Soluble In
- Product Properties
- ACRYSOL DR-110 Rheology Modifier is a synthetic, liquid thickener based on anionic, acrylic chemistry.
- ACRYSOL DR-110 Rheology Modifier is easy to handle and incorporate and does not itself support the growth of mildew. It can be incorporated into the mill base, before or after addition of pigments and extenders, to give sufficient viscosity for good grinding efficiency.
- Alternatively, ACRYSOL DR-110 Rheology Modifier can be added during the let down stage of a coating’s manufacture.
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000005
- Principal
Storage & Handling
- Storage Precautions
Protect from freezing. Store products in tightly closed original containers at temperatures recommended on the product label.
Other
- Appearance
- Milky white emulsion
- Color (SDS)
- White
- Item Number
- Odor (SDS)
- Acrylic like
- Other Hazards
- No data available
- Protect from Freezing
- Yes
- Temperature Control
- Yes
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions pH 4.5 - - Material Composition
Value Units Test Method / Conditions Active Content 30.0 % % Solid Content 30.0 %(W/W) %(W/W) - Physical Properties
Value Units Test Method / Conditions Bulk Density 8.85 lb/gal lb/gal wet Density 1.06 g/mL g/mL Storage Temperature 34.0-120.0 °F °F Viscosity 30.0 cPs cPs Brookfield Viscometer at 60 rpm, spindle 3 - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) 100.0 °C °C at 760 mmHg, water Boiling Point (SDS) 100.0 °C °C Evaporation Rate (SDS) max. 1.0 % % Butyl acetate = 1 Melting Point (SDS) 0.0 °C °C Melting Point (SDS) 0.0 °C °C Water Relative Vapor Density (SDS) max. 1.0 - Air = 1, Water Relative Vapor Density (SDS) max. 1.0 - Air = 1 Specific Gravity (SDS) 1.0-1.2 - Water = 1 Vapor Pressure (SDS) 17.0 mm Hg mm Hg at 20°C, Water Vapor Pressure (SDS) 17.0 mm Hg mm Hg at 20°C Viscosity (SDS) 1.0-50.0 mPa.s mPa.s Volatile Content (SDS) 69.0-71.0 % % Water pH (SDS) 3.5-5.0 - - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 540.0 d d