Products

RHOPLEX® HA-16 is a firm binder with excellent durability. It offers formulating flexibility with additives due to its nonionic nature and is especially suggested for battery separators and other industrial nonwoven applications.

SUKOREZ® NX-710 is a waterwhite thermoplasic resin obtained from polymerization and hydrogenation of cyclic ingredients. The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure sensitive adhesive(HMPSA) and solvent based pressure sensitive adhesive(SBPSA), because of its good heat resistance and good compatibility with base polymers such as metallocene catalyzed polyolefin(me-PO), ethylene vinyl acetate(EVA), styrene block copolymer(SBC) and amorphous polyalphaolefin(APAO).

TRIGLYCIDYL ISOCYANURATE JF-77C is an isocyanurate-based crystalline polyepoxide compound, its molecular weight is 297 (CAS Number: 2451-62-9), and it owns good heat resistance, weather resistance, adhesive, and high-temperature performance.

Licocene® PE MA 4351 fine grain is a highly grafted maleic anhydride polyethylene wax with advantageous physical properties e. g. for powder coating applications. The maleic anhydride modified polyethylene creates structured surfaces in combination with titanium dioxide. The roughness depends on the ratio of titanium dioxide to Licocene® PE MA 4351 fine grain. Licocene® PE MA 4351 fine grain is used as an efficient coupling agent for glass-, wood-, natural fibre and inorganic filled PE compounds.

Foral® 85 resin is a glycerol ester of hydrogentated gum rosin. It is an exceptionally pale, thermoplastic resin that has outstanding resistance to oxidation and to discoloration caused by heat and ageing. It can be used in a wide array of adhesive tackifier applications and in protective/barrier type coatings where light color and oxidation resistance are needed.

SUKOREZ® SU-420 is water white thermoplastic resin obtained from polymerizing of C5/Cyclic/Aromatic and hydrogenation. The major usages are tackifier for hot melt adhesive (HMA), hot melt pressure sensitive adhesive(HMPSA) because of its good heat resistance and good compatibility with base polymers such as ethylene vinyl acetate (EVA), Styrene-Butadiene-Styene block copolymer(SBS), Styrene-Isoprene-Styene block copolymer(SIS).

CYMEL® 1123 Resin is a highly methylated/ethylated benzoguanamine resin developed primarily for use as a crosslinking agent in electrocoating and conventional coatings requiring high detergent and chemical resistance. Its excellent balance between adhesion and film flexibility, especially after several cure cycles, makes CYMEL® 1123 Resin particularly well suited for can coating applications. While CYMEL® 1123 Resin is insoluble in water, it shows excellent compatibility with water soluble backbone polymers and provides very good stability in pH-buffered alkaline waterborne formulations. The poor light resistance properties of benzoguanamine makes CYMEL® 1123 Resin unsuitable for exterior applications.

CRAYVALLAC® WF-3200 provides the formulator with the means of controlling the frictional characteristics of a coating as well as enhancing its surface protection properties. CRAYVALLAC® WF-3200 is readily dispersed into coating formulations using a variety of techniques e.g. high-speed dispersers, bead mills and triple roll mills.

CRAYVALLAC® WF-1000, with its fine particle size and very low coefficient of friction, provides the formulator with an excellent aid to controlling the frictional characteristics of a coating as well as enhancing its surface protection properties. Furthermore, the very high melting point of CRAYVALLAC® WF-1000 makes it an excellent choice for high temperature applications.

VANCRYL® 989 is a high glass transition temperature acrylic emulsion for the graphic arts industry. Excellent gloss and fast drying rates can be obtained by utilizing VANCRYL® 989 in inks and coatings. It is suitable for both flexographic and gravure printing on paper substrates. VANCRYL® 989 has excellent compatibility with pigment dispersions and alcohols. Inks formulated with this product have good transfer, printability, and resolubility. Because it is a hard polymer, VANCRYL® 989 can also be formulated as a high gloss over print varnish with very good heat, water, oil, and scuff resistance.

TRIGLYCIDYL ISOCYANURATE JF-77B is an isocyanurate based crystalline polyepoxide compound, its molecular weight is 297(CAS Number:2451-62-9), it owns good heat resistance,weather resistance,adhesive and high temperature performance.

TRIGLYCIDYL ISOCYANURATE (TGIC) JF-77 is an isocyanurate based crystalline polyepoxide compound, its molecular weight is 297(CAS Number:2451-62-9), it owns good heat resistance, weather resistance, adhesive and high temperature performance.

SILIKOFTAL® HTT is a ethoxy-functional silicone polyester resin

CRAYVALLAC® WW-1074 is a polytetrafluoroethylene (PTFE) wax used in can coating and coil coating applications. It is solvent-based and uses isopropanol as a carrier.

D.E.R.® 916 Epoxy Resin is a modified, semi-solid, epoxy novolac resin emulsified in water.