Products

SILIKOFTAL® HTL 2/MPA is a methoxy-functional silicone polyester resin

UCECOAT® 7230 is a UV/EB energy curable polyurethane dispersion with low tack before cure and after water evaporation. It has been developed for high hardness top coats on plastics, wood and other substrates, including both transparent and pigmented. UCECOAT® 7230 demonstrates high reactivity, good compatibility and good colloidal stability. The cured coating exhibits high gloss and very high hardness, abrasion resistance, chemical resistance, as well as good adhesion on plastics.

UCECOAT® 7674 is an acrylated polyurethane dispersion in water designed for waterborne UV/EB curable coatings. UCECOAT® 7674 is anionic in nature, making it compatible with water without any external emulsifier. Due to the presence of these ionic groups, it is not stable under acidic conditions. UCECOAT 7674 contains no co-solvent. UCECOAT® 7674 exhibits outstanding wetting of wood surfaces, imparting warmth and richness to the appearance of the wood. UCECOAT® 7674 provides hardness in the polymerized coating along with good stain and chemical resistance.

D.E.H.® 445L cycloaliphatic polyamine hardener is used as curing agent for epoxy resin. It offers low tendency to yellowing when exposed to UV irradiation, low viscosity and long pot life.

EBECRYL® 4680 is an aliphatic urethane acrylate diluted 20% by weight with 1,6-hexanediol diacrylate (HDDA)". EBECRYL® 4680 exhibits good reactivity and produces hard, tough coatings.

EBECRYL® 8210 is an aliphatic urethane acrylate that exhibits low viscosity and high reactivity in ultraviolet (UV) light or electron beam (EB) curable coatings. Cured films of EBECRYL® 8210 demonstrate high hardness with good scratch, abrasion and chemical resistance. EBECRYL® 8210 also contains primary hydroxyl groups that can be utilized for dual cure polymerization. Dual cure can provide instantaneous tack-free coating surfaces via UV or EB exposure while reaction of the hydroxyl groups with a suitable isocyanate enables polymerization in regions of the coating where UV or EB energy exposure is insufficient or absent.

EBECRYL® 4857 is a low viscosity, monomer free aliphatic urethane diacrylate which exhibits good flexibility in UV or EB cured films. The resin is designed to exhibit low yellowing and good exterior durability. Due to its low Tg the product is suitable for applications requiring haptic properties (e.g. “soft touch/feel”).

Dynasylan® 1146 diaminofunctional silane may be used in coatings, adhesives, and sealants to improve the adhesion of amino­reactive resins. These are resins such as silicones (RTV), two­part urethanes, silylated urethanes, MS polymers, and two­part epoxies to inorganic surfaces, plastic surfaces, and inorganic fillers. Dynasylan® 1146 silane is characterized by randomly­distributed linear and cyclic oligosiloxanes and fullfills the OECD polymer definition. Its low volatility and viscosity make compounding easy. Dynasylan® 1146 silane produces significantly less by- product (VOC) and has a correspondingly low odor level during application.

UCECOAT® 2801 is an acrylated polyurethane dispersion in water designed for waterborne UV/EB curable inkjet inks. UCECOAT® 2801 is anionic in nature, making it compatible with water without any external emulsifier. Due to the presence of these ionic groups, it is not stable under highly acidic conditions. UCECOAT® 2801 contains no co-solvent. UCECOAT® 2801 exhibits good properties concerning the jetting and water resolubility before cure which are key requirements for inkjet application. UCECOAT® 2801 provides hardness in the polymerized coating along with good stain and chemical resistance.

COMFORTSIL ECOSOFT E4 is a medium to low viscosity diamino functionalised polydimethyl siloxane, specially developed for formulation to emulsions for textile softening and textile resin plasticising.

Bluesil™ FLD 21648 is a medium viscosity amino functionalized siloxane, specially developed for the formulation of elastomeric coatings destined for use in textile applications, waterproofing of substrates, or polishes.

HP1717 - Polystar Soya Long Oil Alkyd is a long oil alkyd made with soya oil in low odour mineral spirits. It has been formulated for use in wood and metal coatings and architectural enamels. This product exhibits low yellowing, good gloss, and good overall appearance.

UCECOAT® 7856 is a new high-solids and solvent-free radiation curable polyurethane dispersion in water suitable for high gloss applications with excellent clarity and distinctness of image (DOI). The product has an excellent colloidal stability (shelf life of 12 months) and complies with VOC-free, tin-free Does not contain intentionally added organic tin compounds and stenomer Chemically well-defined monomeric or multi functional acrylates, with low molecular weight and very narrow molecular weight distribution free requirements. Due to its low viscosity and its good responsiveness to rheology modifiers, it can be easily applied by spray, roller or curtain coating operation. The product can be advantageously applied in one single coat and does not require sanding, although it can still benefit from polishing. The cured coating exhibits good chemical and scratch resistance required for high-end wooden furniture topcoats, though it is also suitable for other substrates and applications.

HP7031-Coconut Alkyd is a short oil alkyd resin dissolved in xylene that uses coconut oil to produce a resin with initial low colour and little or no yellowing on aging.

AddWorks® IBC 760 is a mixture of a UV absorber, hindered amine light stabilizer (HALS) and antioxidant without any hazard labeling and designed to provide outstanding performance in SMP sealants in terms of light and heat stabilization. Available in micronized powder form, AddWorks® IBC 760 prolongs the service life of SMP sealants as it reduces cracking and yellowing that typically occurs if exposed to strong sunlight or high temperature conditions. The performance is evident when tested against current benzotriazole containing solutions in the market. Our new stabilizer solution is an ideal ingredient to formulate high performance SMP sealants used for construction, automotive and other outdoor applications.