Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Carrier
- Chemical Family
- Product Code
- MITM11960
- Single Ingredient
- No
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Product Performance
UCECOAT 7230 is characterized by:
- High reactivity
- Low tack after water evaporation and before UV curing
- Good substrate wetting
- Good compatibility with other waterborne resins
- Good colloidal stability
UV/EB cured films based on UCECOAT 7230 are characterized by the following performances:
- Very high hardness
- High gloss
- Good adhesion on plastics such as PC, ABS, PC, ABS
- Excellent abrasion resistance.
- Excellent chemical resistance.
- Good orientation of metallic flake pigment
- Low yellowing
The actual properties of UV cured films also depend on the selection of the other formulation components.
Applications & Uses
- Application Method
- Coating End Applications
- Compatible Substrates & Surfaces
- Cure Method
- Markets
- Applications
- Product Applications
Formulated UV curable products containing UCECOAT 7230 may be applied by spray, curtain, T-bar as well as several roll coating methods.
UCECOAT 7230 is recommended for use in:- Clear topcoat for plastics and wood applications
- Metallic and pigmented mono-coats
- Inks
Properties
- Physical Form
Packaging & Availability
Principal Information
- Group Principal Number
- S000001
- Principal
Storage & Handling
- Storage Conditions
- Protect the product from freezing. Care should be taken not to expose the product to high temperature conditions or direct sunlight. Containers should be kept closed and away from materials that react with water. Bacteriological contamination can occur if the product is stored for an extended period in a container which is not sufficiently sealed or clean. Storage and handling should be in stainless steel, amber glass, or amber polyethylene containers. After prolonged storage product can settle and may require agitation to re-disperse. This product is stable under normal conditions of handling and storage. Do not store this material under an oxygen free atmosphere.
Other
- Appearance
- Milky emulsion
- Appearance (SDS)
- Dispersion
- Color (SDS)
- Translucent to opaque white
- Flammability (SDS)
- Normal combustion
- Item Number
- Miscible in (SDS)
- Water, all proportions
- Odor (SDS)
- Mild practically odorless
- Other Hazards
- Polymerization may occur from excessive heat, contamination or exposure to direct sunlight .
- Oxidizing Properties (SDS)
- None
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions pH 7.0-8.0 - - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 0.0 d d - Physical Properties
Value Units Test Method / Conditions Density 1.05 g/mL g/mL At 25°C Film Forming Temperature max. 10.0 °C °C Particle Size max. 100.0 nm nm Viscosity max. 200.0 cPs cPs at 23°C - Material Composition
Value Units Test Method / Conditions Solid Content 43.5-46.5 %(W/W) %(W/W) - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) 100.0 °C °C Water Flash Point (SDS) min. 100.0 °C °C Flash Point (SDS) min. 100.0 °C °C non-Flammable Specific Gravity (SDS) 1.05 - at 20°C Vapor Pressure (SDS) 2.3 kPa kPa At 20°C, Water Viscosity (SDS) 20.0-200.0 mPa.s mPa.s at 23°C, RPM: 50 Low viscous liquid Volatile Content (SDS) 53.5-56.5 %(W/W) %(W/W) Water pH (SDS) 7.0-8.5 -