Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Carrier
- Chemical Family
- Country of Origin
- Product Code
- MITM00587
- Single Ingredient
- No
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Labeling Claims
- Product Performance
UCECOAT 7674 is characterized by:
- Milky appearance
- Very low viscosity
- Tacky after water evaporation and before UV curing. Tacky material can be re-emulsified and reused after filtration
- Very good compatibility. easy formulation
UV/EB cured products based on UCECOAT 7674 are characterized by the following performance properties:
- Excellent adhesion on wood
- Excellent flexibility
- Outstanding wetting of wood surfaces
- High hardness
- Very low yellowing
The actual properties of UV/EB cured products also depend on the selection of other formulation components such as reactive diluents, additives, and photoinitiators.
Applications & Uses
- Application Method
- Coating End Applications
- Compatible Substrates & Surfaces
- Cure Method
- Markets
- Applications
- Product Applications
Formulated UV/EB curable products containing UCECOAT® 7674 are typically applied by spray or curtain coating and by roller and T-bar in field applied applications. Additional methods may also be used.
UCECOAT® 7674 is recommended for:
- Wood primers.
- Clear and pigmented wood coatings.
- Top coat for wood furniture and doors.
- Field applied clear coatings on wood, concrete, VCT, and resilient flooring
Properties
- Physical Form
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000001
- Principal
Storage & Handling
- Storage Conditions
Protect the product from freezing. Care should be taken not to expose the product to high temperature conditions or direct sunlight. Containers should be kept closed and away from materials that react with water. Bacteriological contamination can occur if the product is stored for an extended period in a container which is not sufficiently sealed or clean. Storage and handling should be in stainless steel, amber glass, or amber polyethylene containers. After prolonged storage product can settle and may require agitation to re-disperse. This product is stable under normal conditions of handling and storage. Do not store this material under an oxygen free atmosphere. Wash thoroughly after handling. Use with adequate ventilation.
Other
- Appearance
- Emulsion
- Appearance (SDS)
- Emulsion
- Color (SDS)
- White
- Item Number
- Miscible in (SDS)
- Water, all proportions
- Odor (SDS)
- Mild practically odorless
- Other Hazards
- Contact with skin may cause a cross-allergic reaction in persons already sensitized to acrylates.
- Oxidizing Properties (SDS)
- None
- Protect from Freezing
- Yes
- Temperature Control
- Yes
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions pH 6.4-7.8 - - Material Composition
Value Units Test Method / Conditions Non-Volatile Content 38.5-42.0 % % - Physical Properties
Value Units Test Method / Conditions Density 1.05 g/cm³ g/cm³ at 20°C Particle Size max. 150.0 nm nm Storage Temperature 39.2-104.0 °F °F Viscosity max. 200.0 mPa.s mPa.s at 25°C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) 100.0 °C °C Value for water Flash Point (SDS) min. 100.0 °C °C Flash Point (SDS) min. 100.0 °C °C non-Flammable Specific Gravity (SDS) 1.05 - at 20°C Vapor Pressure (SDS) 2.3 kPa kPa at 20°C, Water Viscosity (SDS) 20.0-200.0 mPa.s mPa.s at 23°C, 50rpm, low viscous liquid Viscosity (SDS) 20.0-200.0 mPa.s mPa.s at 23°C, RPM: 50 Low viscous liquid Volatile Content (SDS) 58.0-62.0 %(W/W) %(W/W) Water pH (SDS) 6.4-7.8 - 10% aqueous solution - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 6.0 mo mo