Products

Toyal TCP-2D is used in chemical and industrial manufacturing, fillers, levellers and joints, and resin manufacturing markets. It is applied in fillers and thermal management.

3M™ Ceramic Microspheres W-210 is a unique, semi-transparent, white-colored, fine particle size, high-strength microspheres. 3M™ Ceramic Microspheres W-210 is typically used to reduce VOC levels; increase filler loadings; improve hardness; and add burnish, scrub and abrasion resistance to a variety of coating formulations. Due to the ceramic chemistry of 3M™ Ceramic Microspheres W-210, it is also UV transparent down to 250 nm and have utility in radiation-curable and thin-film powder coatings.

CRAYVALLAC® PC is a micronised hydrogenated castor oil derivative surface enhancing additive for powder coatings based on PRIMID, hybrid and TGIC technologies. CRAYVALLAC® PC is easily incorporated using conventional pre-mixing techniques prior to extrusion. The use of CRAYVALLAC® PC leads to a substantial improvement in the appearance of the final cured powder coating. This improvement is due to CRAYVALLAC® PC enhancing the flow, levelling and degassing processes during cure. This is the result of CRAYVALLAC® PC greatly reducing the melt viscosity during this critical levelling stage in the cure cycle. This viscosity reduction also enhances the performance of other additives such as acrylic levelling agents and the degassing agent benzoin. CRAYVALLAC® PC works well in both clear and pigmented powder coating systems based on PRIMID, Hybrid and TGIC technologies.

WWT674105 Orange 34 is a pigment used as a case ingredient in industrial markets.

Oat Fiber BCS30 XS2 is used as a fiber source in bakery, beverage, dairy, and nutraceuticals and supplements markets.

Focus Ester 603 is a vegetable-based polymerized ester designed to boost performance and enhance finish in severe metalworking applications, especially aluminum applications and drawing and stamping. Focus Ester 603 is a unique medium molecular weight ester designed to offer the highest lubricity and film strength. Focus Ester 603 a branched- chain fatty acid, which offers the highest level of thermal and hydrolytic properties. Also, it is expected to be less susceptible to bacterial attack than conventional fatty esters. Focus Ester 603 can replace or enhance traditional fats, esters and extreme pressure friction modifiers.

CUPRON CLASSIC HDPE MASTERBATCH 30% is a material with microbe and mildew resistance, preventing odor build-up. It functions as a biocide in plastics and elastomers.

Bluesil™ EMUL 12 is a silicone-based product. It is primarily used as a mold release agent and release agent in plastics and elastomers.

CARPOL® GP-1500 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 1500 Da. This triol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, CARPOL® GP-1500 may also be included as a component in other urethane products and formulations.

Cotrol™ AMB is an ammonium benzoate-based flash rust corrosion inhibitor. It is a cost-effective flash rust inhibitor that does not leave water-soluble components in the cured film thereby causing water sensitivity problems.

Additin® RC 9300 is a corrosion-resistant additive package with anti-wear, antioxidant, and corrosion inhibitor functions. It provides excellent demulsibility, filterability, oxidation and thermal stability, hydrolytic stability, and high load carrying capacity. Suitable for compressor fluids, compressor oils, and hydraulic fluids. Compatible with metal, non-ferrous metal, and steel.

Bluesil™ FLD 621 V1500 is α/ ω vinyl dimethylpolysiloxanes. They are available in viscosities from 20 mm²/s to 170 000 mm²/s. They are mainly used as base polymers for the production of silicone elastomers produced by a polyaddition crosslinking reaction, and as additives to modify organic polymer compounds.

Additin® RC 7120 is a single-ingredient antioxidant used in gear oils, hydraulic oils, metalworking fluids, and turbine & compressor fluids. It provides excellent oxidation stability, making it suitable for use in compressor oils, gear oils, hydraulic fluids, metalworking fluids, and turbine oils.

Additin® RC 2516 is a deactivated, medium active, light colored, low odor, high viscosity sulfur carrier with good solubility even in nonpolar base oils. Due to its excellent polarity and lubricity in combination with a controlled sulfur activity, it is particularly suited for manufacturing metalworking fluids for medium to heavy duty stamping, fine blanking and metal forming processes. The low copper corrosivity makes it also suitable for machining yellow metal alloys. It is also highly recommended for the formulation of EP greases, slideway oils and industrial gear oils.