Enhanced TDS
Identification & Functionality
- Chemical Family
- Fluids & Lubricants Functions
- Function
- Anti-Wear Agent, Corrosion Inhibitor, Antioxidant, Additive Packages
- Product Code
- MITM08173
- Technologies
- Product Families
Features & Benefits
- Fluids & Lubricants Features
- Labeling Claims
Applications & Uses
- Compatible Substrates & Surfaces
- Fluids & Lubricants End Use
- Fluids & Lubricants Type
- Markets
- Applications
- Product Application
Additin® RC 9300 is ideally suited for use in ashless hydraulic fluids for which the following high performance demands have to be met:
- Very high oxidation stability (extended service life)
- High load carrying capacity
- Good demulsification
- Good corrosion protection against steel and non-ferrous metals
- Good filterability
- Excellent thermal and hydrolytic stability
Additionally Additin® RC 9300 is also ideally suited for formulating compressor fluids with antiwear properties based on high quality mineral oil as well as PAO and PAO/ester mixtures
According to requirements, the recommended treatment levels of Additin® RC 9300 are in the range of 0.45 to 0.6 % by weight.
Properties
- Physical Form
- Soluble In
- Solubility Data
Soluble in mineral oils and synthetic base oils. However, it is necessary to verify the solubility in the base oils used and the compatibility with other additives.
Packaging & Availability
- Packaging Type
- Regional Availability
Principal Information
- Group Principal Number
- S000008
- Principal
Storage & Handling
- Handling and Storage Conditions
Shelf life (months) at recommended temperature 24 Maximum storage temperature (°C) 30 Maximum short term storage temp. for storage time of 1 month (°C) 45 Maximum shelf life at 20 °C (months) 24 Maximum shelf life at 45 °C (months) 1 Maximum handling (unloading/pumping) temperature (°C) 60 Pourpoint (°C) -26 Viscosity at 40 °C (mm%s) 60 Viscosity at blending temperature (mm/s at °C) 6 at 60°C Recommended blending temperature (°C) 60 Maximum blending temperature (°C) 80 Maximum skin temperature during heating
When product is flowing (°C) 100 When product is stationary (°C) 70 Supplier known incompatibilities / compatibility problems Not compatible with strong oxidants, alkaline products, acids and bases
- Storage Conditions
Store in a dry place at room temperature approx. 24 months This product is liable to crystallization at low temperatures. If this occurs, gentle warming up to 40 - 50 °C with agitation will ensure homogenity of the product without adverse effects. Local overheating - above 60 °C - must be avoided.
Other
- Appearance
- Light coloured clear liquid
- Color (SDS)
- Yellow
- IATA/ICAO Proper Shipping Name
- Environmentally hazardous substance, liquid, N.O.S. (2,6-di-tert-butylphenol, diphenylamine)
- IATA/ICAO UN Number
- UN 3082
- IMO/IMDG EmS Fire
- F-A
- IMO/IMDG EmS Spill
- S-F
- IMO/IMDG Proper Shipping Name
- Environmentally hazardous substance, liquid, N.O.S. (2,6-di-tert-butylphenol, di-alkylaminomethyl-tolyltriazole)
- IMO/IMDG UN Number
- UN 3082
- Insoluble in (SDS)
- Water
- Item Number
- Odor (SDS)
- Phenol like
- Other Hazards
- None known
- USA/DOT Emergency Response Guide Number
- 171
- USA/DOT Proper Shipping Name
- Environmentally hazardous substance, liquid, N.O.S. (2,6-di-tert-butylphenol, di-alkylaminomethyl-tolyltriazole)
- USA/DOT UN Number
- UN 3082
- Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 730.0 d d - Physical Properties
Value Units Test Method / Conditions Density 975.0 kg/m³ kg/m³ ASTM D1298 at 20°C Flash Point 140.0 °C °C Cleveland Open Cup Flash Point 140.0 °C °C ASTM D92 - Material Composition
Value Units Test Method / Conditions Mineral Oil Content 23.0 %(W/W) %(W/W) - Application Information
Value Units Test Method / Conditions Dosage (Use Level) 0.45-0.6 %(W/W) %(W/W) - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Decomposition Temperature (SDS) min. 80.0 °C °C Density (SDS) 0.98 g/cm³ g/cm³ at 20°C Density (SDS) 0.98 g/cm³ g/cm³ at 68°F Flash Point (SDS) 284.0 °F °F Closed Cup Kinematic Viscosity (SDS) 60.0 mm²/s mm²/s At 104°F Kinematic Viscosity (SDS) 60.0 mm²/s mm²/s At 40°C Melting Point (SDS) -26.0--15.0 °C °C