Products

TAMOL® 945 is a highly-effective polycarboxylic acid dispersant supplied at 45% solids in the sodium form. It is recommended for use in waterborne paint and coatings formulations where it offers a wide range of performance and formulation benefits.

Protectosil® 266 F is a free flowing colorless to slightly yellow, frost resistant liquid based on a silane or siloxane. Protectosil® 266 F can be applied at full-strength or after dilution with suitable solvents, such as ethanol or white spirit.

CYMEL® MI-97-IX Resin is a partially iso-butylated melamine crosslinker supplied in a mixture of iso-butanol and xylene. Its fast drying behavior provides films with good early block resistance for stacking of parts and makes CYMEL® MI-97-IX Resin suitable for fast low temperature curing systems, like wood and paper coatings, providing very good film hardness, adhesion and appearance.

CYMEL® XW 3106 Resin is a specially alkylated, high solids melamine crosslinking agent designed for solvent-borne, two-pack ambient and low bake formulations. The low-temperature cure potential for this crosslinker provides the opportunity to formulate high-performance coatings for heat-sensitive substrates. These systems have excellent early hardness, resistance properties, appearance, and hot/cold cycle flexibility.

Additin® RC 5000 is a lubricity additive for fully synthetic metal working fluids and HFC fluids

EMERAL EMR D8130 is an effect pigment and pigment used in coatings.

SETAMINE® 19-1001 is a binder and resin used in surface coating applications.

SURFONIC® TDA-8/90 is the 90% active aqueous solution of the eight- mole ethoxylate of isotridecyl alcohol. It is a water soluble, nonionic surface-active agent which is compatible with other nonionic surfactants and with most anionic and cationic surfactants.

Stabaxol® KE 7646 is a polycarbodiimide-masterbatch, carrier polymer, polyethyleneterephthalate (PET). It functions as antihydrolysis agent for thermoplastic polyesters, especially for PET. Stabaxol® KE 7646 can be used in PET monofilaments for dryer-conveyor belts in paper making machines where it assists to multiply the service life time.

CYMEL® U-93-210 Resin is an n-butylated urea formaldehyde resin supplied in a mixture of n-butanol and xylene. It has excellent compatibility with epoxy resins and is recommended in primer formulations which are to be topcoated and rebaked.

ZINCUM SW 2309 is in low bulk density, fine white powder.

H.B. Fuller® PD-0128 is a binder and resin with excellent scrub resistance, used in waterborne adhesives for adhesives, sealants, and architectural coatings.