Products

B 2410 is a Ba/Zn Liquid Stabilizer.

Exolit® RP 6520 is a brown-red paste, and is a thixotropic blend of castor oil with stabilised, microencapsulated red phosphorus. The paste form allows safe and simple handling and thus processing is made easier. The thixotropic nature of this concentrate hinders the sedimentation process and simplifies the re-homogenisation after long storage periods.

PEBAX® Rnew® 30R51 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide based on renewable resources. PEBAX® Rnew® 30R51 resin is an inherently dissipative polymer and can be dry blended or compounded with a polymer matrix to lower the surface resistivity of the final part. This grade is particularly recommended for PMMA matrices. This hydrophilic grade when extruded into either a thin film or laminated on to a substrate offers excellent permeability to moisture vapor while remaining waterproof.

Europrene® SOL TH 2315 is a linear block copolymer obtained by selective hydrogenation of styrene - butadiene-styrene block copolymers. The polymer is based on styrene and ethylene/butylene, where bound styrene content is 32%wt. A non-staining, TNPP free antioxidant system is added during the production process.

BONDERITE® L-FG ADAG C is an aqueous-based colloidal dispersion. It contains ultra-fine graphite particles along with a unique stabilizer and binder system. These properties produce excellent lubricity and release, faster wetting, and higher dilution ratios. It remains stable at service temperatures of 600°F and intermittent temperatures as high as 2200°F.

MARLOWET® R 11 is a fatty acid polyethylene glycol ester

Licocene® PP 1302 fine grain is a propylene-Ethylene-Copolymer Wax.

REAFREE® 4763-S is a binder and resin used in coil coating and powder coating applications. It offers excellent flow, good mechanical properties, high gloss, high reactivity, outdoor durability, and reduced blooming.

DzBh Baling® SBS YH-791H is a linear styrene/butadiene block copolymer.

Lanxess 6414 is a pigment used in architectural coatings, automotive OEM coatings, building & construction, industrial, and industrial coatings markets.

Dynasylan® PTEO an alkyltrialkoxysilane is important component in sol­gel systems. Dynasylan® PTEO is a colorless, low­viscosity liquid. Dynasylan® PTEO is regarded as trifunctional since all three alkoxy groups can hydrolyze. Additionally Dynasylan® PTEO contains a propyl group that adds a hydrophobic character to the coatings. Hydrolysis leads to silanol groups which, in a subsequent condensation reaction, form very stable siloxane bonds (­Si­O­Si­). Condensation occurs parallel to hydrolysis once a certain amount of silanol groups have been formed. The absolute and relative rates of hydrolysis and condensation depend on a number of factors. The most important factors include pH, concentration, solvent, temperature and the catalyst.

Paricin® 1 is a waxy solid supplied as soft white flakes. Paricin® 1functions as an internal lubricant and processing aid for butyl and EPDM rubber. It is resistant to oxidation, oil and water. Paricin® 1 has excellent pigment wetting characteristics and is compatible with most natural waxes.

Bermocoll® M 30 Q is a non-ionic, water soluble cellulose ether intended as a water retaining and consistency improving additive to cement based mortars. Bermocoll® M 30 Q contains methyl, ethyl and hydroxyethyl substituents giving a unique balance between workability and strength.