Products

Additin® RC 3045 is a chemical blend used as an anti-wear agent and antioxidant in gear oils, greases, hydraulic oils, metalworking fluids, and motor oils. It is compatible with industrial oils and fluids and provides enhanced wear protection and oxidation resistance.

Wayncor™ 224 is a white non-refractive, corrosion inhibitive pigment used in protective coatings systems. It is compatible with a wide assortment of commercially available resin systems. It can provide an economic alternative to standard grade zinc phosphate. Performance can vary depending upon choice of resin system, but in general the use level would be between 3 - 10% total formula weight.

ACRYSOL™ SCT-275 Rheology Modifier is an efficient nonionic polyethylene oxide(HEUR) associative rheology modifier which can impart excellent rheological properties including flow and leveling, uniform film formation and film build, to latex based coatings. ACRYSOL™ SCT-275 Rheology Modifier is recommended for use in flat to semigloss paints and primers for both exterior paints and premium interior paints.It is especially suited to replace or be blended with conventional cellulosic thickeners where improved flow and leveling, increased hiding, and spatter resistance is desired. ACRYSOL™ SCT-275 Rheology Modifier is particularly suited for low solids, vinyl acrylic formulations where it yields excellent flow/sag balance, color acceptance, and syneresis resistance. ACRYSOL™ SCT-275 Rheology Modifier is supplied as a low viscosity liquid that is easy to handle and incorporate in the paint making process.

Focus InhibitR AL is a multifunctional phosphate designed for use in water-reducible metalworking fluids. This additive provides excellent corrosion inhibition properties when machining aluminum alloys. It can also deliver outstanding EP properties to improve a fluid’s lubrication performance.

D.E.R.® 736 Liquid Epoxy Resin is a reaction product of epichlorohydrin and polypropylene glycol.

CEAMTEX 1693 is an alginate based product, standardized to obtain an uniform performance. Alginate is a natural hydrocolloid extracted from brown seaweeds.

CARPOL® PGP-2740 is a propylene glycol-initiated polyether polyol. CARPOL® PGP-2740 has a functionality of two and an average molecular weight of 2700 Da. This diol is polymerized with propylene oxide and then capped with 40% ethylene oxide. The outcome is a polyol with enhanced reactivity and hydrophilicity.

Baling® SBS YH-165 is a styrene-butadiene-styrene (SBS) block copolymer, commonly used in various industrial applications. This product offers enhanced flexibility, toughness, and durability, making it ideal for use in adhesives, sealants, and as a modifier in asphalt and rubber products.

Additin® RC 3740 is an organophosphate-based anti-wear agent and extreme pressure additive used in metalworking fluids. It is applied at a dosage of 0.2-1.5% and is suitable for broaching oil, deep hole drilling oil, grinding fluids, honing oils, and other metalworking fluids. The product offers an ashless additive feature, promotes good surface finish, and exhibits low reactivity.

ZHENGDA® ZD-140 is characterized by repeating oxypropylene units in the backbone. ZHENGDA® ZD-140 Amine-terminated Polyether is a difunctional, primary amine with average molecular weight of about 430. The primary amine groups are located on secondary carbon atoms at the end of the aliphatic polyether chains.

CARPOL® NIONIC™ L-61 Surfactant is a nonionic surfactant with a chemical structure designed to make it act as a defoamer in many applications. Even at very low concentrations, CARPOL® NIONIC™ L-61 can be used to reduce the superficial tension of liquids, including high viscosity liquids. Defoaming performance is a function of cloud point and end use temperature and CARPOL® NIONIC™ L-61 is our lowest foaming surfactant. These materials are water soluble at low temperatures and will flocculate when warmed above their cloud point.

HIKOREZ® H-2200 is light color thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins/diolefins and aromatic olefins derived from the process of thermal cracking of naphtha. The major usages are hot melt based pressure sensitive adhesive(HMPSA). And this grade also can be used as tackifier for hot melt adhesive (HMA), because of its good compatibility with base polymer such as EVA, SBS (Styrene Butadiene Styrene), SIS (Styrene Isoprene Styrene).

CIMBAR 10 is barium sulfate, an inorganic pigment used as a filler and pigment in powder coating, battery expander, plastics, and elastomers applications.

CEAMFIBRE 49200 F is a dietary fbre ingredient produced from high quality citrus peel.