Products

WWT481255 Phthalo Green BS provides liquid colorants that are low in viscosity, high in color strength, and maintain excellent stability. Possible applications for the WWT line include, but are not limited to, water-borne adhesives and caulk compounds, integral concrete, and industrial and architectural coatings.

EBECRYL® LED 02, a mercapto modified polyester acrylate resin, can be added as a co-resin to UV curable formulations. EBECRYL LED 02 transforms formulations into UV LED, UVA, or low energy curable systems by providing better surface cure. In addition, this co-resin can also be used to obtain better surface cure in high energy cure formulations. EBECRYL LED 02 provides better surface cure by mitigating oxygen inhibition of the free radical process.

TOYOCAT®-DT belongs to the tertiary amines chemical family and is used in industrial and industrial coatings markets.

CEAMPECTIN SS 4510 is based on a high ester pectin, extracted from selected high quality citrus peel and standardized to obtain an uniform performance.

AP 5223 is a reactive polyamidoamine hardener for epoxy resins based coatings.

Hostavin® 3206 liq is a highly effective, oxalanilide based, liquid UV-B absorber. It is characterized by its excellent compatibility in all solventborne coatings, with an improved resistance to migration and low volatility, under normal stoving conditions as well as low color in wet paint.

Baeropan® MC 9109 KA/1 is a Ca/Zn Solid Stabilizer.

AP5551 is medium viscosity, polyamide adduct hardener for epoxy resins based lacquers and coatings.

ASPECT® 15 is a mid-range talc product line specifically engineered for under-the-hood use in TPO applications when a natural grade is not needed.

Biochek® 8064 is a biocide used in plasticized polyvinyl chloride (PVC-P) and polyurethanes (PU). It offers bacteria and fungus resistance while preventing discoloration in plastics and elastomers.

HIKOTACK® P-901 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages is tackifier for Ethylene Vinyl Acetate copolymer (EVA) based hot melt adhesive (HMA). HIKOTACK® P-901 shows very good compatibility with numerous polymers as well as EVA, and provides good solubility with various solvents. In addition, this grade can be used as rubber compounding agent for tires, tubes, rubber coated clothes.

CARPOL® GSP-370 is a glycerin/sucrose-initiated polyether polyol. The high functionality of the initiators yields a resultant polyol with a nominal functionality of seven and a typical hydroxyl number of 370. Due to this polyol’s high functionality, it is typically used in rigid foam and its applications. Blending this polyol with other polyether polyols allows for foam systems with high to lower degrees of crosslinking. In addition, CARPOL® GSP-370 is mildly catalytic, which enables the use of less catalyst while still providing the formulator with control over the system’s reactivity.

Focus Polysurf Semi Base 25 produces an excellent general purpose semi-synthetic fluid when diluted with water by the formulator. Focus Polysurf Semi Base 25 has exceptional wetting properties and is formulated with corrosion inhibitor and lubricity additives. It is designed to be diluted at a ratio of 30/40% base to 70/60% low hardness water. Focus Polysurf Semi Base 25 does not contain biocides, but it is compatible with most standard biocides. Depending on the biocide, a slight adjustment with oleic acid may be required.

Durastrength® 350 impact modifier is a high performance acrylic impact modifier that imparts superior impact properties to rigid vinyl products. It was designed to give the impact resistance necessary to pass critical impact test procedures, while maintaining the excellent weatherability, processability and flow properties of Durastrength® 200 impact modifier.