Products

CYCAT® 4045 CATALYST is an amine blocked para-toluene sulfonic acid catalyst. It is recommended for accelerating the cure response of amino crosslinking resins while providing improved formulation package stability compared with the un-blocked para-toluene sulfonic acid CYCAT® 4045 CATALYST It is especially recommended for use with highly alkylated amino crosslinking resins. It provides excellent stability in high solids and waterborne systems, and in the latter it can be added without causing binder precipitation, which can often occur due to a drop in pH.

DzBh Baling® YH-2605 is styrene-butadiene copolymer with content of 25% of styrene.

ZHENGDA® ZM-1207 is a monoamine based on a copolymer backbone. ZHENGDA® ZM-1207 polyetheramine is a monofunctional, primary amine with an average molecular weight of about 2,000. The propylene oxide/ethylene oxide (PO/EO) mol ratio is 10/31.

Wayncor™ 222 is a white, non-refractive, anti-corrosive pigment used in protective coatings. It is widely considered by the coatings industry to be a standard corrosion inhibitor. It exhibits a high degree of versatility and is compatible with almost all commercially available aqueous and solvent based coatings. The use level will vary depending upon resin system, pigment volume concentration and desired performance parameters, however typical use levels are between 3 - 10% total formula weight.

DRY #1 Castor Oil is a Technical Grade pure castor oil having a very low moisture content at 0.02% maximum. Also known as ricinus oil, it is a triglyceride of fatty acids which occurs in the seed of the castor plant, Ricinus communis. The low moisture content makes this product ideal for lubricant or polyurethane applications where low moisture is required.

Pale 1000 Blown Castor Oil commonly known as blown oils have increasing viscosities resulting from oxidative and crosslink polymerization at the double bonds and hydroxyl groups. Oxidative polymerization of castor oil yields products with increased viscosities and decreasing solubility in aliphatic solvents, increasing compatibility with various resins and improved ability to wet and disperse pigments while imparting solvent and abrasion resistance to lacquer systems. The polymerized oils are used to plasticize a variety of resins in adhesive and sealant systems, inks and hot melts. The heavier viscosity polymerized oils are processing aids and plasticizers for rubber polymers, imparting oil and solvent resistance.

CARPOL® TEAP-265 is a triethanolamine-initiated polyether polyol. The resultant material has a nominal functionality of three and a typical hydroxyl number of 635. This polyol’s functionality and short-chained nature make it optimal for use in rigid foam. Primarily used as a rigid polyol modifier, CARPOL® TEAP-265 can be used to cut the high viscosity seen with most sucrose based rigid polyols while acting as a good crosslinker. In addition, this polyol contains amine which enhances the overall system reactivity.

CARPOL® PGP-2000 is a propylene glycol-initiated polyether polyol. CARPOL® PGP-2000 has a functionality of two and an average molecular weight of 2000 Da. This diol is polymerized solely with propylene oxide for controlled reactivity.

Toyal 201 is a medium, conventional air atomized aluminum powder.

CARPOL® PGP-4025 is a propylene glycol-initiated polyether polyol. The resulting material has a functionality of two and an average molecular weight of 4000 Da. This diol is polymerized with propylene oxide and then capped with 25% ethylene oxide. The outcome is a polyol with enhanced reactivity when compared to its counterpart CARPOL® PGP-4000. Main applications include C.A.S.E., however, CARPOL® PGP-4025 may also be included as a component in other urethane products and formulations.

Corrosperse™ 177 M is a 70% dispersion of Strontium Chromate in Methyl Amyl Ketone. It has a Fineness of Grind (7 Hegman) which means no grinding is required and it can easily be incorporated using high speed mixing techniques. Because the product is a pourable liquid, there are none of the concerns associated with Hexavalent Chrome in pigment form, specifically exposure to dust.

EBECRYL® 8411 is an aliphatic urethane diacrylate diluted 20% by weight with the reactive diluent isobornyl acrylate (IBOA). Films of EBECRYL® 8411 cured by ultraviolet light (UV) or electron beam (EB) exhibit exceptional extensibility and flexibility, in addition to excellent abrasion resistance, good adhesion, exterior durability and resistance to yellowing.

SOCER BRAZIL COL 1440 WW/X S Elliottii Rosin obtained by distillation of crude gum / pine oleoresin collected from Pinus trees (live).

UCECOAT® 7674 is an acrylated polyurethane dispersion in water designed for waterborne UV/EB curable coatings. UCECOAT® 7674 is anionic in nature, making it compatible with water without any external emulsifier. Due to the presence of these ionic groups, it is not stable under acidic conditions. UCECOAT 7674 contains no co-solvent. UCECOAT® 7674 exhibits outstanding wetting of wood surfaces, imparting warmth and richness to the appearance of the wood. UCECOAT® 7674 provides hardness in the polymerized coating along with good stain and chemical resistance.

EBECRYL® 4150 is an undiluted isocyanate functional urethane acrylate designed for use in two component dual cure systems for coatings on wood, plastic and metal.