Products

Esterex™ A51 is a API category Group V fluids. Esterex™ A51 has excellent low temperature properties, high viscosity indices, good lubricating properties, and low volatilities. Esterex™ A51 can be used as sole basestocks or blendstocks with other synthetic fluids in many automotive and industrial lubricant applications. Esterex™ A51 is ideal in high temperature conditions, such as reciprocating air compressors, where discharge valve cleanliness is required.

HP0145 - Water-Reducible Alkyd is a water-reducible short oil chain stopped alkyd dissolved in Glycol Ether EB and 2-Butanol (50/50). Based on Tall Oil Fatty Acids, this product may be reduced with water after appropriate neutralization with materials such as ammonia, triethylamine or DMEA. Baking enamel formulations can also be produced by adding appropriate amino resins.

AP4406L is a modified aliphatic amine hardener used with liquid epoxy resin based systems at ambient as well as low temperature.

WACKER® AK 60000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 60000 mm²/s. Due to its chemical structure, WACKER® AK 60000 has an outstanding property profile, which sets it apart from organic materials such as mineral oils.

EBECRYL® 4220 is an aliphatic urethane acrylate diluted 25% in tripropyleneglycol diacrylate (TPGDA). EBECRYL® 4220 produces tough coatings that resist yellowing.

AP1028 is medium viscosity, reactive, phenalkamine hardener for epoxy resin based lacquers and coatings.

POLYCO™ 2160 is Carboxylated Polyvinyl Acetate Homopolymer with excellent mechanical stability and very low grit levels. Medium particle size with good pigment binding ability and excellent water resistance. Minimizes "water interference mottle" in offset printing and offers good ink receptivity, glueability, and brightness with very low odor.

Esterex™ P62 is a synthetic ester, specifically 1,2-benzenedicarboxylic acid di-C9-11-branched alkyl esters, C10-rich, used as a base stock and oil.

EBECRYL® LEO 10553 is a low viscosity polymeric amine modified polyether acrylate that provides low extractables, low odor and low migration and after UV or EB curing. EBECRYL® LEO 10553 is recommended for use in low odor and low migrating UV overprint varnishes (OPV’s) and inks for indirect food packaging applications.

Baerolub® FTA VEG is a relatively high bulk density, free flowing flake (SMS) or prill (SP) forms.

EBECRYL® 8110 is a novel(1) energy curable specialty resin developed to enhance coatings with long lasting easy-to-clean (E2C) surface property. Coatings based on EBECRYL 8110 cured by ultraviolet light (UV) or electron beam (EB) exhibit oil and water repellent effect (high contact angle) and easy removal of fingerprints, oils, dust and other contaminants from coatings surfaces.

EVOQUE™ 3150C was engineered to enhance titanium dioxide efficiency, providing improved hiding or equivalent hiding at a reduced titanium dioxide usage level. This acrylic emulsion incorporates ambient crosslinking technology, which improves household stain resistance performance and chemical resistance properties. Based on prior commercial iterations of EVOQUE™ technology, the overall exterior durability is anticipated to be excellent.

Additin® M 97.001 is a chemical mixture used as an additive package in gear oils, industrial oils, and metalworking fluids. It provides excellent wear resistance and extreme pressure performance. The product is suitable for applications like broaching oil, gear oils, industrial lubricants, and machining oils.

Staybelite® Resin is gum rosin that has been partially hydrogenated via a catalytic process. It is a pale, thermoplastic, acidic resin, Hydrogenation makes this resin highly resistant to oxidation and discoloration and to changes in solubility characteristics, when it is exposed to air and heat. In these respects, it is greatly superior to ordinary non- hydrogenated rosins.