Products

Bluesil™ RES 6482X is a reactive silicone resin which was developed for use in the manufacture of decorative medium temperature paints. Currently this resin is mainly used for the manufacture of air drying, temperature resistant silicone alkyd paints. It is also more compatible than other silicones with urea-formaldehyde, melamine-formaldehyde, epoxy, polyurethane and acrylic resins. Another use is as an additive for epoxy paints. It also improves weathering resistance.

ResinOLINE® BD 2 is used as a base stock and oil in drilling fluids and as an ingredient in bar soaps. It also functions as an industrial additive in alkyd resins and bitumen emulsions, improving fuel lubricity performance.

AP 1054 LV is a low viscosity and highly reactive Phenalkamine hardener for epoxy resins based lacquers and coatings. It has excellent rapid cure properties, even at low temperatures offers very good chemical resistance, and provides excellent adhesion on wet, unprepared surfaces and concrete.

VALIO EILA™ NUTRI F+ LACTOSE FREE FORMULATED MILK POWDER is a lactose free, nutritionally healthy milk protein powder produced from cow's milk of Finnish origin. The powder contains a lot of high value milk protein, vitamins, minerals and phospholipids. Valio EilaTM NUTRI F+ powder is designed for use as a nutritional food for older adults to ensure adequate nutrient yield.

ROYALE BLACK® Bleumina® 381 is a series of Medium/High color Furnace (MCF/HCF) blacks that provide excellent aesthetics, along with high durability, in the final product. With very low particle size and a balance of structure, it exhibits good UV protection, high jetness, and gloss.

LOTRYL® 24MA02 is a random ethylene-methyl acrylate copolymer.

Rilsan® CLEAR G170 CPD is a high performance transparent polyamide resin with outstanding thermal resistance. Rilsan® CLEAR G170 CPD has been designed for injection molding applications.

Bluesil™ FLD 47 V60 000 is dimethylpolysiloxane polymers with linear chains.

ROYALE BLACK® PP131 is specially developed for plastics applications typically for PE, PP, PVC, EVA, PA6 and PA66 compounds for automotive, electronic, home appliance, footwear and film applications. Morphological properties of ROYALE BLACK® PP131 are balanced in such a way that it provides a good combination of dispersibility and color strength and it offers very good UV protection and smooth surface finish. It has high purity with very low sulfur, ash and exhibits low moisture absorption and it improves mechanical durability even at high temperature and direct sun light applications. ROYALE BLACK® PP131 is suitable for indirect food contact applications conforming to EC 10/2011 and recommended for all general purpose masterbatch, PVC masterbatch and direct compounding applications. ROYALE BLACK® PP131 is also recommended for water base and; solvent base ink applications.

ROYALE BLACK® PI137 is a very low structure specialty black designed to exhibit high gloss and higher jetness in printing inks. ROYALE BLACK® PI137 is suitable for both aqueous and non aqueous liquid inks requiring low viscosity, high gloss and high jetness. It helps the liquid to maintain the fluid viscosity required for printing processes.

ZETASPERSE® 3100 is an anionic wetting and dispersing additive for waterborne formulations.Showsoutstanding stabilization properties.

SURFONIC® LF-17 is an ethoxylated and propoxylated linear primary 12- 14 carbon number alcohol. The low-foaming and good surface active properties of it suggests its use in any application where foam control is necessary.

TERSPERSE® 2500 is a solution of an acrylic graft copolymer in water/propylene glycol. The product, which is a clear to hazy liquid at room temperature, is soluble in water, lower alcohols and glycols. It is insoluble in aliphatic and aromatic hydrocarbons.

Bluesil™ SLT 10T is a one-component, odorless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. Bluesil™ SLT 10T adheres without a primer on virtually all surfaces found in building construction and accepts movements of 25% in continuous service within a wide range of temperatures.