Products

SURFYNOL® DF-75 defoamer is an organic-based mineral oil-free additive designed to provide knockdown and sustained defoaming in a wide variety of water-based formulations. Performance benefits can be obtained when this product is incorporated into aqueous inks, overprint varnishes, coatings, adhesives and paper coatings. This compound is particularly useful for foam control in systems that are based upon acrylic resins.

DYNOL™ 604 is an acetylenic diol based super wetter providing very good static and dynamic surface tension reduction in waterborne coatings and inks.

Additin® RC 8000 is a sulfur linked polymer, inactive Extreme Pressure Additive, light-colored and with low odor.

Dynasylan® AMEO-T is a blend of primary and secondary aminofunctional silanes. The blend contains more than 90 wt% of 3­ aminopropyltriethoxysilane. Aminofunctional silanes posses a reactive amino group and a hydrolyzable ethoxysilyl group. The dual nature of this reactivity allows Dynasylan® AMEO­T to bind chemically to both inorganic materials (e.g. glass, metals and fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers) thus functioning as an adhesion promoter, a surface modifier and a reactive reagent. Dynasylan® AMEO­T is a yellowish liquid with an amine­like odor. It is soluble in alcohols as well as aliphatic or aromatic hydrocarbons.

SURFYNOL® 61 surfactant is a 100% active multifunctional surface active agent. Due to its volatile nature, SURFYNOL® 61 surfactant can evaporate from a system under use conditions and/or heating. Therefore, SURFYNOL® 61 surfactant is useful in applications where residual surface activity or contamination is undesirable, such as silicon wafer and glass cleaning. SURFYNOL® 61 surfactant can provide excellent wetting of polyethylene and polypropylene films. Upon evaporation, little to no surfactant remains to interfere with trapping or cause water sensitivity in printing inks. During the curing of silicones by the silane/alkene addition reaction, SURFYNOL® 61 surfactant can “block” platinum catalysts through complexation; this effect can be used to delay the curing reaction. However, the SURFYNOL® 61 surfactant typically flashes off upon heating to liberate the active catalyst and trigger the reaction.

ACEMATT® 790 is an untreated, medium particle sized precipitated silica. It is especially recommended for coil coatings, as well as general industrial coatings.

Protectosil® WB CONCENTRATE is a clear, penetrating, breathable water repellent for use on brick, concrete masonry units and some natural stones. A 100% concentrated alkyltrialkoxysilane which is intended to be diluted with water and provides the high performance traditionally associated with alcohol carried systems. Prevents water and waterborne contaminants from entering the sub- strate and causing premature deterioration. Protectosil® WB CONCENTRATE is especially suited for imparling water repellency to substrates such as brick masonry and split-face block. By preventing water and waterborne contaminants from entering the substrate, Protectosil® WB CONCENTRATE reduces such problems as efflorescence, leaching, acid rain deterioration, scaling, dirt buildup, staining and corrosion of reinforcing steel. Treated surfaces are fully breathable because the natural moisture vapor transmission is not affected. This will eliminate problems caused by entrapped moisture, including blushing of the sealer and freeze-thaw damage to the masonry.

TEGO® Rad 2300 is an efficient non-foaming, radically cross-linkable substrate wetting and slip additive. Recommended even for high shear applications and the wetting of low energy substrates including fresh litho inks.

Hatcol® 2965 is a pure polyol ester base stock based on pentaerythritol which combines excellent high temperature stability with a very low pour point.

TEGO® Foamex 825 is a compatible defoamer emulsion based on polyether siloxane technology. Good balance of effectiveness and compatibility.

TEGO® AIREX 991 shows very strong defoaming against both macro- and micro foam in solvent borne and high solids coatings. Especially for spray-applied coatings.

TEGO® AddBond LTW-B improves adhesion and flexibility of solvent borne coatings on steel, galvanized steel, aluminum, and plastics.