Products

D.E.R.® 538-A80 is used in electrical laminates and functions as a resin, binder, and matrix material in composite materials.

DzBh Baling® SIS YH-1124 is a linear styrene/isoprene block copolymer.

Coscat® 83 is an organobismuth compound that was specifically developed as a catalyst for two component, polyurethane systems. For soft to medium hardness systems the addition of a zinc catalyst can reduce a potential lag in final cure, yielding a stronger final cure typical of a mercury-based catalyst.

Hatcol® 2957 is a pure polyol ester base stock based on neopentyl glycol and branched carboxylic acids.

NuTone® 37 is a low structure carbon black that can impart high gloss and high jetness in printing inks, coatings and other applications.

DERTOPHENE® H 150 is a light-colored and low VOC terpene phenolic resin with high softening point. Its high polarity allows specific performances when formulated with EVA copolymers: specific adhesion, thermal resistance, cohesive balance.

Solumer™ 8705L is an ethylene-octene copolymer produced via Nexlene™ technology. It performs well in a wide range of general purpose thermoplastic elastomer applications and has excellent flow characteristics.

Additin® RC 7115 is a highly effective, high temperature stable phenolic antioxidant.

CARPOL® PGP-4025 is a propylene glycol-initiated polyether polyol. The resulting material has a functionality of two and an average molecular weight of 4000 Da. This diol is polymerized with propylene oxide and then capped with 25% ethylene oxide. The outcome is a polyol with enhanced reactivity when compared to its counterpart CARPOL® PGP-4000. Main applications include C.A.S.E., however, CARPOL® PGP-4025 may also be included as a component in other urethane products and formulations.

CYMEL® 1161 Resin is a highly monomeric, methylated/ iso-butylated melamine crosslinker with a high degree of alkylation. Its high monomer content allows for the formulation of high solids coatings with excellent appearance, recoat adhesion, and flexibility. CYMEL® 1161 Resin is especially recommended for automotive topcoats, general metal finishes, and coil coatings

EBECRYL® 8896 is a revolutionary aliphatic urethane acrylate designed for applications requiring haptic properties (e.g. “soft touch/feel”). Films of EBECRYL® 8896 cured via exposure to ultraviolet light (UV) or electron beam (EB) are tough, flexible, and resistant to yellowing. EBECRYL® 8896 is compatible with variety of fillers, pigments, waxes, and polymeric beads allowing formulator maximum formulating latitude to create a number of haptic properties ranging from a velvety/silky feel to EBECRYL® 8896’s intrinsic rubbery feel.

WANNATE® IT-170MX is used in automotive OEM coatings, industrial coatings, and vehicle refinish applications. Applied by spray, it functions as a binder, resin, and hardener compatible with alkyds, polyacrylates, and polyester polyols.

APODIL 1023 is a dimer acid based diglycidyl ester. The product is used as reactive diluent for high viscosity epoxy resins, which imparts flexibility, impact resistance and toughness.

CRYSTIC® 199 is an isophthalic polyester resin. It is recommended for use in high performance applications, such as the aircraft industry, where superior thermal and electrical properties are required. Fully cured laminates made with Crystic® 199 have excellent chemical and heat resistance. They can withstand long periods (1 year) at temperatures up to 150°C, and shorter periods at temperatures up to 200°C, with no serious loss of properties.