Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Chemical Name
- EC Number
- 215-609-9
- Pigment Type
- Plastics & Elastomers Functions
- Product Code
- MITM15663
- Single Ingredient
- Yes
- Synonyms
- Acetylene Black, Furnace Black, Lamp Black, Thermal Black
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Labeling Claims
Applications & Uses
- Ink & Toner End Applications
- Plastics & Elastomers End Uses
- Product Applications
- NuTone® 37 can be used in a variety of inks & coatings applications.
- With its treated surface, it disperses more easily than other regular furnace carbon blacks. NuTone® 37 carbon black is suitable for use in high quality inks including heat-set, sheetfed, UV curable inks and coatings application.
- The dispersion of NuTone® 37 carbon black depends on the equipment used and the formulation.
Properties
Regulatory & Compliance
- Quality Standards
Packaging & Availability
Principal Information
- Group Principal Number
- S003252
- Principal
Other
- ADR/RID/ADN Proper Shipping Name
- Not Applicable
- ADR/RID/ADN UN Number
- Not Applicable
- Appearance (SDS)
- Black color
- Dust Explosion Class (SDS)
- ST1
- Dust Explosion Class (SDS)
- ST1
- Explosive Nature (SDS)
- Dust may form explosive mixture in air
- IATA/ICAO Proper Shipping Name
- Not Applicable
- IATA/ICAO UN Number
- Not Applicable
- IMO/IMDG Proper Shipping Name
- Not Applicable
- IMO/IMDG UN Number
- Not Applicable
- Insoluble in (SDS)
- Water
- Item Number
- Odor (SDS)
- Odorless
- Other Hazards
- This substance is classified as hazardous as a combustible dust by the United States 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200). May cause reversible mechanical irritation to the eyes, skin and respiratory tract especially at concentrations above the occupational exposure limit. Do not expose to temperatures above 300°C.
- USA/DOT UN Number
- Not Applicable
- Optical Properties
Value Units Test Method / Conditions Color Intensity 126.0 % % - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 730.0 d d - Physical Properties
Value Units Test Method / Conditions Heating Loss 0.6 % % as shipped Sieve Fractionation (Retained) 20.0 ppm ppm 325 µm Specific Surface Area 99.0 m²/g m²/g Specific Surface Area 101.0 m²/g m²/g nitrogen - Material Composition
Value Units Test Method / Conditions Peroxyacyl Nitrate Content 0.65 cm³/g cm³/g Volatile Content 3.0 % % - Application Information
Value Units Test Method / Conditions Dosage (Use Level) 5.0-8.0 % % coatings Dosage (Use Level) 10.0-15.0 % % Liquid Inks, Including UV Curable Inks Dosage (Use Level) 10.0-20.0 % % Sheetfed - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Autoignition Temperature (SDS) min. 140.0 °C °C Bulk Density (SDS) 200.0-680.0 kg/m³ kg/m³ granules Bulk Density (SDS) 100.0-420.0 kg/m³ kg/m³ Powder Bulk Density (SDS) 200.0-680.0 kg/m³ kg/m³ water = 1, Granules Bulk Density (SDS) 100.0-420.0 kg/m³ kg/m³ water = 1, Powder Explosion Limit (SDS) 50.0 g/m³ g/m³ VDI 2263 Furnace black, dust, Lower Explosive Pressure (SDS) 10.0 bar bar Explosive Pressure Rise Rate (SDS) 30.0-100.0 bar/s bar/s Ignition Energy (SDS) min. 10000.0 MJ MJ VDI 2263 Initial Boiling Point (SDS) min. 4000.0 °C °C Lower Explosive Limit (SDS) 50.0 g/m³ g/m³ VDI 2263 dust, furnace black Maximum Explosion Pressure (SDS) 10.0 bar bar Minimum Ignition Energy (SDS) min. 10000.0 MJ MJ VDI 2263 Minimum Ignition Temperature (SDS) min. 500.0 °C °C BAM Furnace Minimum Ignition Temperature (SDS) min. 500.0 °C °C BAM Furnace cloud Minimum Ignition Temperature (SDS) min. 500.0 °C °C VDI 2263 Minimum Ignition Temperature (SDS) min. 500.0 °C °C VDI 2263 cloud Minimum Ignition Temperature (SDS) min. 400.0 °C °C VDI 2263 layer Molecular Weight (SDS) 12.01 g/mol g/mol Relative Density (SDS) 1.7-1.9 - at 20°C Relative Density (SDS) 1.7-1.9 - at 20°C, Water = 1 Volatile Content (SDS) max. 2.5 %(V/V) %(V/V) non-oxidised carbon black Volatile Content (SDS) 2.0-8.0 %(V/V) %(V/V) oxidised carbon black pH (SDS) 2.0-10.0 - at 20°C, 50 g/l H₂O pH (SDS) 2.0-10.0 - at 20°C, 50 g/L, water, as supplied