Products

Si 266™ is a silane used in rubber manufacturing as a base chemical for rubber products.

CEAMLACTA 2222 is a carrageenan based product, standardized to obtain a uniform performance. Carrageenan is a natural hydrocolloidextracted from red seaweed of the Rhodophyceae class SC.

SILIKOPHEN® P 50/X non reactive methyl phenyl silicone resin

D.E.H.® 20 Epoxy Curing Agent is an economical, liquid diethylenetriamine (DETA) aliphatic polyamine hardener that provides a short pot-life and cures in minutes with standard unmodified liquid epoxy resins. D.E.H.® 20 Epoxy Curing Agent is used for civil engineering applications, maintenance paints, and in the manufacture of epoxy-amine adducts. It is also used in adhesives, epoxy composite applications and as an accelerator for polyamide curing agents. In electrical applications, D.E.H.® 20 Epoxy Curing Agent is used for casting, potting and encapsulation.

TEGO® ViscoPlus 3030 is a pH-independent, associative thickener with pseudoplastic flow behavior.

ACEMATT® 3400 is a specially after-treated thermal silica with a unique property profile. Along with excellent matting efficiency, it provides multiple functionalities in coating formulations. It is especially recommended for soft-feel applications with high surface smoothness.

Hostavin® 3055 liq is a low-molecular radical scavenger of the type hindered amine light stabilizer (HALS) for solventless and solventborne paints. On principle, it is also suitable in waterbome coatings. Hostavin® 3055 liq is characterized by its excellent solubility, broad compatibility, low volatility and good stabilization efficiency. It can either be added to the ready-to-use paint or incorporated during the paint production. However, as all UV stabilizers, it ought not to be added to the mill-base. Depending on the requested stabilization effect, the addition rate should be in the range of 1.0 to 3.0 %. All concentrations relate to active UV stabilizer on solid resin. Pre-trials, covering various concentrations, are highly recommended. As a non-substituted HALS, Hostavin 3055 liquid is slightly basic and because of this can have an influence on the crosslinking of binders. In such a case, the altemative use of Hostavin 3058 liquid is recommended. Since HALS is highly recommended for all outdoor durable coatings, the need for an additional UV absorber strictly depends on the UV transmittance of the final coating. Inorganically pigmented coatings with good hiding power do usually not require an additional UV absorber, clear coats certainly do.

Supreme™ 891 is an ethylene-octene copolymer produced via Nexlene™ technology. Supreme™ 891 performs well in a wide range of various packaging films with excellent sealing property, cling property, and impact strength.

CEAMFIBRE 90-818 SF is a dietary vegetable fibre ingredient in combinaton with hydrocolloids.

Bleumina® 223 is a series of Medium/High Color Furnace (MCF/HCF) blacks that provide excellent esthetics, along with high durability, in the final product. With very low particle size and a balance of structure, it exhibits good UV protection, high jetness, and gloss.

Exolit® AP 428 is a fine-particle ammonium polyphosphate produced by a special method. The product is largely insoluble in water and completely insoluble in organic solvents. It is colorless, non-hygroscopic and non-flammable. Exolit® AP 428 differs from most other commercial products in the following ways, greatly reduced solubility in water lower viscosity in aqueous suspensions, lower viscosity in PU polyol suspensions.

Polyfill 204 is a alumina trihydrate and leading flame retardant and smoke suppressant product used in a wide range of industrial applications.