Products

PURMOL™ 4ST is a sodium (Na) type A zeolite with a pore size of approximately 4 Angstroms (0.4 nm). PURMOL™ 4ST is recommended for use with high quality coatings. In general, we recommend the addition of 2.5% - 5% Purmol powder to the polyol component. This must be stirred thoroughly for a minimum of two hours to allow the Purmol to adsorb all the water before addition of the isocyanate. With metal dust coatings we recommend the addition of 0.5% - 2% PURMOL™ 4ST powder.

ACRYSOL™ TT-935 Rheology Modifier is an alkali-soluble, anionic associative thickener, designed to give medium-shear-rate viscosity in interior/exterior flat latex paints. ACRYSOL™ TT-935 Rheology Modifier can be used as either a primary or co-thickener in water-based coatings. It offers excellent resistance to roller spattering with better film build and leveling than conventional thickeners. Paints formulated with ACRYSOL™ TT-935 Rheology Modifier as a sole thickener exhibit improved flow and leveling compared with medium- to high-molecular-weight cellulosic thickeners. The rheology can be modified to further improve flow and leveling by addition of low levels of surfactant or glycol-ether-type co-solvents to reduce the low-shear viscosity. Addition of some pre-dispersed colorant may also have this effect. ACRYSOL™ TT-935 Rheology Modifier is recommended for interior paints requiring improved flow and leveling and lower raw material cost compared to cellulosic thickeners. Where superior water resistance is required, we recommend ACRYSOL™ SCT-275 Rheology Modifier. ACRYSOL™ TT-935 can be used in exterior paints, but formulators should exercise caution to minimize potential blistering due to the anionic nature of this product. Delivered as a low-viscosity liquid, it is very easy to handle and incorporate into paint. It is resistant to microbiological degradation, thereby avoiding viscosity loss in paint, a common problem for manufacturers.

D.E.R.® 660-X80 Epoxy Resin Solution is a semi-solid reaction product of epichlorohydrin and bisphenol A in a xylene solution. D.E.R.® 660-X80 Epoxy Resin is an intermediate molecular weight epoxy resin in a xylene solution developed for use in high solids/high build coating formulations. This epoxy resin solution enables the formulation of systems combining the high solids and chemical resistance of liquid epoxy resins with the outstanding adhesion, flexibility and fast cure of higher molecular weight solid epoxy resin. D.E.R.® 660-X80 Epoxy Resin can form the basis of a two-component coating system with either polyamine, polyamide or polyamidoamine curing agents to provide high quality coatings which are resistant to a number of chemical reagents. These coatings also exhibit the excellent mechanical properties normally associated with epoxy resin systems. D.E.R.® 660-X80 Resin is ideal for medium to heavy duty coatings, such as ship hulls, marine paints, tank linings and industrial maintenance coatings.

Licowax® PED 191 flakes is a oxidized polyethylene wax with high viscosity.

H.B. Fuller® PD-0461 is a binder and resin used in waterborne adhesives for adhesives and sealants.

Europrene® SOL T 6205 is a radial block copolymer obtained by anionic polymerisation. The polymer is based on styrene and butadiene, where bound styrene is 25 % wt and diblock content is 15%. A non staining antioxidant system is added during the production process.

Baerolub® PA-7010 is a paraffin and oxidized PE wax blend.

Fine Hurd Blend is the perfect starting point to connect “eco” with industry. IND HEMP hurd fibers are ideal for absorbent applications and biocomposites. Our hurd fiber products are sustainably sourced, rapidly renewable and expect to be free from dust and foreign materials.

MACROLEX® Yellow G is a solvent dye used in plastics and elastomers.

EBECRYL® 1290 is a hexafunctional aliphatic urethane acrylate that exhibits very fast cure response when exposed to ultraviolet light (UV) or electron beam (EB). Cured films of EBECRYL® 1290 demonstrate outstanding hardness, scratch and abrasion resistance, chemical resistance, and are resistant to yellowing.

TMPTA is a widely used reactive diluent in ultraviolet light (UV) and electron beam (EB) curable coatings and inks. It imparts crosslinking to the cured polymer providing hardness and chemical resistance.

Ceridust® 1060 Vita is a micronized polar modified wax based on renewable resource.

CEAMLACTA DB 91-812 is a carrageenan based product, standardized to obtain a uniform performance. Carrageenan is a natural hydrocolloid extracted from red seaweed of the Rhodophyceae class SC.

CYMEL® U-21-510 Resin is a partially n-butylated urea resin supplied in a mixture of n-butanol and xylene. It has excellent compatibility with epoxy resins. It is recommended in primer formulations which are to be topcoated and re-baked. Low viscosity and epoxy solution compatibility make this product an ideal modifier.